Linux version 2.4.26-1.ll.rhfc1.ccrmacustom.test (root@Linux-DAW.kensnet.org) (gcc version 3.2.3 20030422 (Red Hat Linux 3.2.3-6)) #2 SMP Mon Nov 1 16:06:08 GMT 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001ff30000 (usable) BIOS-e820: 000000001ff30000 - 000000001ff40000 (ACPI data) BIOS-e820: 000000001ff40000 - 000000001fff0000 (ACPI NVS) BIOS-e820: 000000001fff0000 - 0000000020000000 (reserved) BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved) 511MB LOWMEM available. found SMP MP-table at 000ff780 hm, page 000ff000 reserved twice. hm, page 00100000 reserved twice. hm, page 000f1000 reserved twice. hm, page 000f2000 reserved twice. On node 0 totalpages: 130864 zone(0): 4096 pages. zone(1): 126768 pages. zone(2): 0 pages. ACPI: RSDP (v002 ACPIAM ) @ 0x000f9e30 ACPI: XSDT (v001 A M I OEMXSDT 0x02000423 MSFT 0x00000097) @ 0x1ff30100 ACPI: FADT (v003 A M I OEMFACP 0x02000423 MSFT 0x00000097) @ 0x1ff30290 ACPI: MADT (v001 A M I OEMAPIC 0x02000423 MSFT 0x00000097) @ 0x1ff30390 ACPI: OEMB (v001 A M I OEMBIOS 0x02000423 MSFT 0x00000097) @ 0x1ff40040 ACPI: DSDT (v001 P4P81 P4P81097 0x00000097 INTL 0x02002026) @ 0x00000000 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 Pentium 4(tm) XEON(tm) APIC version 20 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 Pentium 4(tm) XEON(tm) APIC version 20 Using ACPI for processor (LAPIC) configuration information Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: ASUSTek Product ID: APIC at: 0xFEE00000 I/O APIC #2 Version 32 at 0xFEC00000. Enabling APIC mode: Flat. Using 1 I/O APICs Processors: 2 Kernel command line: ro root=/dev/hda9 hdc=ide-scsi rhgb ide_setup: hdc=ide-scsi Initializing CPU#0 Detected 3006.865 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 5947.39 BogoMIPS Memory: 514392k/523456k available (1799k kernel code, 8676k reserved, 646k data, 136k init, 0k highmem) Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) Inode cache hash table entries: 32768 (order: 6, 262144 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 32768 (order: 5, 131072 bytes) Page-cache hash table entries: 131072 (order: 7, 524288 bytes) CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 0 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: bfebfbff 00000000 00000000 00000000 CPU: Common caps: bfebfbff 00000000 00000000 00000000 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 0 Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: bfebfbff 00000000 00000000 00000000 CPU: Common caps: bfebfbff 00000000 00000000 00000000 CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 09 per-CPU timeslice cutoff: 1463.08 usecs. enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Booting processor 1/1 eip 2000 Initializing CPU#1 masked ExtINT on CPU#1 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 5996.54 BogoMIPS CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 0 Intel machine check reporting enabled on CPU#1. CPU: After generic, caps: bfebfbff 00000000 00000000 00000000 CPU: Common caps: bfebfbff 00000000 00000000 00000000 CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 09 Total of 2 processors activated (11943.93 BogoMIPS). cpu_sibling_map[0] = 1 cpu_sibling_map[1] = 0 ENABLING IO-APIC IRQs Setting 2 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 2 ... ok. init IO_APIC IRQs IO-APIC (apicid-pin) 2-0, 2-5, 2-10, 2-11 not connected. ..TIMER: vector=0x31 pin1=2 pin2=0 number of MP IRQ sources: 26. number of IO-APIC #2 registers: 24. testing the IO APIC....................... IO APIC #2...... .... register #00: 02000000 ....... : physical APIC id: 02 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 00178020 ....... : max redirection entries: 0017 ....... : PRQ implemented: 1 ....... : IO APIC version: 0020 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 003 03 0 0 0 0 0 1 1 39 02 003 03 0 0 0 0 0 1 1 31 03 003 03 0 0 0 0 0 1 1 41 04 003 03 0 0 0 0 0 1 1 49 05 000 00 1 0 0 0 0 0 0 00 06 003 03 0 0 0 0 0 1 1 51 07 003 03 0 0 0 0 0 1 1 59 08 003 03 0 0 0 0 0 1 1 61 09 003 03 0 0 0 0 0 1 1 69 0a 000 00 1 0 0 0 0 0 0 00 0b 000 00 1 0 0 0 0 0 0 00 0c 003 03 0 0 0 0 0 1 1 71 0d 003 03 0 0 0 0 0 1 1 79 0e 003 03 0 0 0 0 0 1 1 81 0f 003 03 0 0 0 0 0 1 1 89 10 003 03 1 1 0 1 0 1 1 91 11 003 03 1 1 0 1 0 1 1 99 12 003 03 1 1 0 1 0 1 1 A1 13 003 03 1 1 0 1 0 1 1 A9 14 003 03 1 1 0 1 0 1 1 B1 15 003 03 1 1 0 1 0 1 1 B9 16 003 03 1 1 0 1 0 1 1 C1 17 003 03 1 1 0 1 0 1 1 C9 IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 IRQ16 -> 0:16 IRQ17 -> 0:17 IRQ18 -> 0:18 IRQ19 -> 0:19 IRQ20 -> 0:20 IRQ21 -> 0:21 IRQ22 -> 0:22 IRQ23 -> 0:23 .................................... done. Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 3006.0183 MHz. ..... host bus clock speed is 200.0412 MHz. cpu: 0, clocks: 200412, slice: 66804 CPU0 cpu: 1, clocks: 200412, slice: 66804 CPU1 checking TSC synchronization across CPUs: passed. Waiting on wait_init_idle (map = 0x2) All processors have done init_idle PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 00:1f.1 Transparent bridge - Intel Corp. 82801BA/CA/DB/EB PCI Bridge PCI: Using IRQ router PIIX/ICH [8086/24d0] at 00:1f.0 PCI->APIC IRQ transform: (B0,I29,P0) -> 16 PCI->APIC IRQ transform: (B0,I29,P1) -> 19 PCI->APIC IRQ transform: (B0,I29,P2) -> 18 PCI->APIC IRQ transform: (B0,I29,P0) -> 16 PCI->APIC IRQ transform: (B0,I29,P3) -> 23 PCI->APIC IRQ transform: (B0,I31,P0) -> 18 PCI->APIC IRQ transform: (B0,I31,P1) -> 17 PCI->APIC IRQ transform: (B0,I31,P1) -> 17 PCI->APIC IRQ transform: (B1,I0,P0) -> 16 PCI->APIC IRQ transform: (B2,I3,P0) -> 20 PCI->APIC IRQ transform: (B2,I4,P0) -> 23 PCI->APIC IRQ transform: (B2,I5,P0) -> 22 PCI->APIC IRQ transform: (B2,I9,P0) -> 21 PCI->APIC IRQ transform: (B2,I10,P0) -> 22 PCI->APIC IRQ transform: (B2,I10,P0) -> 22 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd Installing knfsd (copyright (C) 1996 okir@monad.swb.de). pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 439M agpgart: Detected an Intel(R) 865G, but could not find the secondary device. Assuming a non-integrated video card. agpgart: Detected Intel(R) 865G chipset agpgart: AGP aperture is 64M @ 0xf8000000 [drm] Initialized tdfx 1.0.0 20010216 on minor 0 [drm] AGP 0.99 Aperture @ 0xf8000000 64MB [drm] Initialized radeon 1.7.0 20020828 on minor 1 [drm] AGP 0.99 Aperture @ 0xf8000000 64MB [drm] Initialized i810 1.2.1 20020211 on minor 2 Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH5: IDE controller at PCI slot 00:1f.1 PCI: Enabling device 00:1f.1 (0005 -> 0007) ICH5: chipset revision 2 ICH5: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:DMA hda: Maxtor 5T060H6, ATA DISK drive blk: queue c03d6d60, I/O limit 4095Mb (mask 0xffffffff) hdc: _NEC DVD_RW ND-2500A, ATAPI CD/DVD-ROM drive hdd: ST36531A, ATA DISK drive blk: queue c03d7320, I/O limit 4095Mb (mask 0xffffffff) ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: attached ide-disk driver. hda: host protected area => 1 hda: 117347328 sectors (60082 MB) w/2048KiB Cache, CHS=7304/255/63, UDMA(100) hdd: attached ide-disk driver. hdd: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error } hdd: task_no_data_intr: error=0x04 { DriveStatusError } hdd: 12706470 sectors (6506 MB) w/128KiB Cache, CHS=13446/15/63, UDMA(33) Partition check: hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 hda9 hda10 > hdd: [PTBL] [790/255/63] hdd1 SCSI subsystem driver Revision: 1.00 kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2 es1371: version v0.32 time 16:07:02 Nov 1 2004 Linux Kernel Card Services 3.1.22 options: [pci] [cardbus] [pm] usb.c: registered new driver hub host/uhci.c: USB Universal Host Controller Interface driver v1.1 PCI: Setting latency timer of device 00:1d.0 to 64 host/uhci.c: USB UHCI at I/O 0xef00, IRQ 16 usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected PCI: Setting latency timer of device 00:1d.1 to 64 host/uhci.c: USB UHCI at I/O 0xef20, IRQ 19 usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 2 ports detected PCI: Setting latency timer of device 00:1d.2 to 64 host/uhci.c: USB UHCI at I/O 0xef40, IRQ 18 usb.c: new USB bus registered, assigned bus number 3 hub.c: USB hub found hub.c: 2 ports detected PCI: Setting latency timer of device 00:1d.3 to 64 host/uhci.c: USB UHCI at I/O 0xef80, IRQ 16 usb.c: new USB bus registered, assigned bus number 4 hub.c: USB hub found hub.c: 2 ports detected Initializing USB Mass Storage driver... usb.c: registered new driver usb-storage USB Mass Storage support registered. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 32768) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. ds: no socket drivers loaded! EXT2-fs warning (device ide0(3,9)): ext2_read_super: mounting ext3 filesystem as ext2 VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 136k freed Adding Swap: 1542200k swap-space (priority -1)