These are quite common on little integrated machines (obviously too small to fit a proper power supply in them.. I don't know enough about the characteristics of which cable does which, but a quick search around the house, I found on on my NAS (QNAP TS409Pro (4x SATA HDD's), an older SATA/IDE 3.5" disc enclosure, and a little tiny dell machine that I was going to use as a TV box for a bit, but never got around to it (SFF for use on a secretaries desk or similar)..<div>

<br></div><div>Anyway, all the ones I have seem to have the same power output (12-17V at 10A) and I've swapped then around between appliances at least a few times (admittedly without thinking about possible consequences!).</div>

<div><br></div><div>You may be able to pick up one with a HDD enclosure or something?</div><div><br></div><div>Cheers</div><div> </div><div>Shannon Carver<br>Email: <a href="mailto:shannon.carver@gmail.com">shannon.carver@gmail.com</a><br>

<br>
<br><br><div class="gmail_quote">2009/12/6 <a href="mailto:general_email@technicalbloke.com">general_email@technicalbloke.com</a> <span dir="ltr"><<a href="mailto:general_email@technicalbloke.com">general_email@technicalbloke.com</a>></span><br>

<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex;"><div class="im">John Edwards wrote:<br>
> On Sun, Dec 06, 2009 at 02:11:55PM +0000, <a href="mailto:general_email@technicalbloke.com">general_email@technicalbloke.com</a> wrote:<br>
><br>
>> Hi,<br>
>><br>
>> I've just been gifted a nice little compact PC via freecycle, problem is<br>
>> there's no PSU. To make matters worse it has a strange round 4 pin<br>
>> connector (1cm diameter) which I'm not familiar with, I can only assume<br>
>> its 12v + 5v. Anyone have one of these spare or know where I might buy<br>
>> one? Assuming I can't find one and I have to jerry rig my own from an<br>
>> old ATX supply is there a standard way to wire these 12v/5v connectors?<br>
>> If not is there an easy way to figure it out? I don't want to fry the thing!<br>
>><br>
>> Picture here... <a href="http://www.technicalbloke.com/12v5v.jpg" target="_blank">http://www.technicalbloke.com/12v5v.jpg</a><br>
>><br>
><br>
> Looks like it might be a 4 pin "Snap and Lock":<br>
>    <a href="http://en.wikipedia.org/wiki/DC_connector#Snap_and_lock_DC_power_connectors" target="_blank">http://en.wikipedia.org/wiki/DC_connector#Snap_and_lock_DC_power_connectors</a><br>
><br>
> Though I have not seen this in the UK, and don't know where to<br>
> buy replacement PSUs for them.<br>
><br>
><br>
><br>
<br>
</div>Yep, that looks like the one, thanks John. I can't find a supplier for<br>
whole PSUs either although it looks like I can at least buy the plugs.<br>
It looks like there's no standard wiring for them either and neither the<br>
nominal manufacturer "Appliansys", or the actual manufacturer "Kink Yung<br>
HK" make any mention of this box on ther websites, let alone have any<br>
downloadable information about them :(<br>
<br>
So I guess I'm on my own. Would people agree it's quite likely to<br>
require +12v & +5v? Or is there a fair chance it's something else like<br>
-12v & + 12v. And can anyone suggest a strategy for testing it out<br>
without knackering it? or some things I can look for on the board to<br>
give me a clue? I think I can see which are the ground pins but sadly<br>
I'm no electronic expert :(<br>
<div><div></div><div class="h5"><br>
Roger.<br>
<br>
--<br>
Gllug mailing list  -  <a href="mailto:Gllug@gllug.org.uk">Gllug@gllug.org.uk</a><br>
<a href="http://lists.gllug.org.uk/mailman/listinfo/gllug" target="_blank">http://lists.gllug.org.uk/mailman/listinfo/gllug</a><br>
</div></div></blockquote></div><br></div>