<div class="gmail_quote">On Tue, Aug 17, 2010 at 4:41 AM, t.clarke <span dir="ltr"><<a href="mailto:tim@seacon.co.uk">tim@seacon.co.uk</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin: 0pt 0pt 0pt 0.8ex; border-left: 1px solid rgb(204, 204, 204); padding-left: 1ex;">
Is the 'need a short lead' problem with the USB drive due to the fact it is<br>
powered from the USB lead ?<br>
<br>
Personally I always go for USB drives that are externally powered; I know this<br>
means an extra plug and power cable, but the USB-powered ones must surely draw<br>
a fair bit of juice from the lead which may well limit what else you can connect<br>
to the USB hub at the same time (?)<br>
<br></blockquote><div><br>Power to the USB drive is limited by the USB standard to 500 mw or 1/2 a watt.  If you are using a short chunky cable as opposed to a long thin one, I would suspect the long thin one doesn't actually have the power wires and is really just a 2 wire cable... not really a USB cable at all.  You could check this with a multimeter pretty easily or try the same cable with another USB powered device that uses less power.<br>
<br>If you are running the drive off a server, you should not have to worry about USB power as each port should supply up to 500 mw.  if you are connecting these devices to a laptop that is not plugged in... then I would worry.  Or if you were plugging them into an unpowered USB hub.  A powered USB hub should supply 500 mw to each port... well the good ones anyway.<br>
<br>Andy<br></div></div><br>