<div dir="ltr">Chris, I Cannot comment on Community Fibre. However I have the service from Hyperoptic. I believe they use BT fibre to the apartment block I live in.<div>In the basement there is a wall mounted cabinet with what I assume is a router (I have never got a look inside it).</div><div>There is a CAT5 copper cable run to each apartment which terminates at a standard RJ45 type socket. Hyperoptic supply a wireless box for each flat.</div><div>This has one external RJ45 port and 4 internal RJ45, plus a SIP Telephone socket. I pay a small amount extra to get a fixed IP address.</div></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Fri, 25 Feb 2022 at 16:05, Chris Bell via GLLUG <<a href="mailto:gllug@mailman.lug.org.uk">gllug@mailman.lug.org.uk</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">Hello<br>
<a href="http://CommunityFibre.co.uk" rel="noreferrer" target="_blank">CommunityFibre.co.uk</a> are using BT ducts to feed multicore distribution fibres <br>
near both my house and my sister's house, and I understand that they will <br>
eventually offer FTTH/FTTP, but they have not replied to my requests for <br>
connection information, while they provide little information on their <br>
website.<br>
<br>
I understand (from seeing what an elderly friend has been given) that they <br>
will probably supply a small wall mounted box which converts from fibre to <br>
ethernet cable and must be powered, plus a small Linksys WiFi unit which must <br>
also be powered. There will be a dynamic 192.168.x.x IPv4 address and a static <br>
/48 IPv6 prefix. The Linksys WiFi will have a single ethernet input and a <br>
single ethernet output. If a SIP telephone adapter is also supplied it is <br>
expected to be connected to the Linksys output.<br>
<br>
Where are the IPv4 dynamic and IPv6 /48 addresses extracted, and where can I <br>
insert a local firewall-router or unmanaged switch? Must it be after the <br>
Linksys, or can I insert my own firewall-router or a local (unmanaged) switch <br>
immediately after the fibre termination to allow cables to be routed separate <br>
from the Linksys, or not even connect the Linksys? I do not use WiFi at home, <br>
although WiFi is currently in use at my sister's house, where the best WiFi <br>
location is not the best distribution point for wired access.<br>
<br>
Thanks for any information.<br>
-- <br>
Chris Bell<br>
Website <a href="http://chrisbell.org.uk" rel="noreferrer" target="_blank">chrisbell.org.uk</a><br>
<br>
<br>
<br>
-- <br>
GLLUG mailing list<br>
<a href="mailto:GLLUG@mailman.lug.org.uk" target="_blank">GLLUG@mailman.lug.org.uk</a><br>
<a href="https://mailman.lug.org.uk/mailman/listinfo/gllug" rel="noreferrer" target="_blank">https://mailman.lug.org.uk/mailman/listinfo/gllug</a><br>
</blockquote></div>