<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 TRANSITIONAL//EN">
<HTML>
<HEAD>
<META HTTP-EQUIV="Content-Type" CONTENT="text/html; CHARSET=UTF-8">
<META NAME="GENERATOR" CONTENT="GtkHTML/3.2.3">
</HEAD>
<BODY>
On Thu, 2004-10-28 at 20:43 +0100, Chris Bond wrote:
<BLOCKQUOTE TYPE=CITE>
<PRE>
<FONT COLOR="#000000">Might have not made it clear I can route on the linux box perfectly its on a</FONT>
<FONT COLOR="#000000">remote machine that where the default gateway is set to route that segment</FONT>
<FONT COLOR="#000000">that it doesn't route via the linux box.</FONT>
<FONT COLOR="#000000">-----Original Message-----</FONT>
<FONT COLOR="#000000">From: Chris Bond [mailto:<A HREF="mailto:chris@logics.co.uk">chris@logics.co.uk</A>] </FONT>
<FONT COLOR="#000000">Sent: 28 October 2004 8:41 PM</FONT>
<FONT COLOR="#000000">To: <A HREF="mailto:mherbert@redhat.com">mherbert@redhat.com</A>; <A HREF="mailto:herefordshire@mailman.lug.org.uk">herefordshire@mailman.lug.org.uk</A></FONT>
<FONT COLOR="#000000">Subject: RE: [Herefordshire] Routing two subnets</FONT>
<FONT COLOR="#000000">Already done that but still doesn't route the packets! Iptables -L shows</FONT>
<FONT COLOR="#000000">default ACCEPT so its not that blocking it... aby more ideas?</FONT>
</PRE>
</BLOCKQUOTE>
<BR>
I assume your network is laid out like somewhat like:<BR>
<BR>
[Box A]<---Subnet 1-->[eth? "Linux Box" eth?]<--Subnet 2-->[Box B]<BR>
<BR>
Starting with basics I'll assume your attempting to ping Box B from Box A. The output from this would be useful, even more useful would be the packet capture whilst your pinging Box B (using tcpdump or ethereal). But to start with if give us the output from the 'route' command on all the boxes (plus a corresponding 'ifconfig' [Linux] or 'ipconfig /all' [Windows]) and we can work from there.<BR>
<BR>
Thanks<BR>
Mark<BR>
<BR>
<BR>
<TABLE CELLSPACING="0" CELLPADDING="0" WIDTH="100%">
<TR>
<TD>
-- <BR>
Mark Broadbent <<A HREF="mailto:markb@wetlettuce.com">markb@wetlettuce.com</A>>
</TD>
</TR>
</TABLE>
</BODY>
</HTML>