[Klug-general] Firewalls

[Stan]

On Wed, Sep 09, 2009 at 09:39:22AM +0100, Peter Childs wrote:
> 2009/9/9 Stan <klug at hardstone.net>:
> > On Wed, Sep 09, 2009 at 08:09:00AM +0100, Peter Childs wrote:
> >> I need some advise.
> >>
> >> I have a rather complicated LAN that has two (yes 2) Network Address
> >> Translations (NATs) between it and the internet at large.
> >>
> >> 1. Is a ADSL Be Box that I've got very little control over
> >
> > Depends on the reason you've very little control over this.  What I've
> > done is enable bridging mode on my BeBox.  NB the guide below looks
> > useful but wasn't what I followed (I can't of course find it now)
> >
> > http://www.beforum.co.uk/showpost.php?p=63624&postcount=76
> >
> >
> 
> Looks a little complicated.

Should be fairly safe (as always backup your configuration before starting)

I've found the template I used
http://318.org.uk/be/Bridge1.tpl

You can add it to your BeBox using ftp (put it in /dl)

You should then get it as an additional config option when using the
setup wizard on the BeBox web gui.

Looks like there have been further developments since I last set mine up:
http://www.beforum.co.uk/showthread.php?p=58216

Stan