If I could chime in with my pennyworth.<div><br></div><div> - If this is a front-end TV machine consider ditching the hard drive and running Linux off a USB/SD Card. That gets rid of a lot of noise/vibration/power requirement straight away. Both my MythTV front ends do this.</div>
<div><br></div><div>- Don't use a fanless PSU. You *need* some air coming in to the case, so if you go fanless - you're only going to have to add a big fan somewhere else. As others have suggested - don't use anything less than a 12CM fan. These can push a lot of air without making much noise at all - if any.</div>
<div><br></div><div>- Clean up your cables as much as possible - use some zip ties to hold things in place ensuring you have a clean passage for air. </div><div><br></div><div>- Use as big a heatsink on your CPU as possible, and ideally have it plugged directly on to the motherboard connector, as these are usually bios controlled - mine can go as low as actually turning the fan off if my machine is cool enough. It's a massive heatsink - so most of the time it is. If yours has a 60/80cm fan on it - just whip it off and mount a 120mm either somewhere else in the case blowing over the heatsink, or using some ducting (you can use cardboard and gaffa to create ducting on a budget).</div>
<div><br></div><div>- Don't bother with water cooling. It's high maintenance, and you'll still need fans to cool it down. There's just no need for it unless you are doing some serious peltier based cooling nowadays.</div>
<div><br></div><div>- As others have suggested - underclocking the CPU can help. It's the voltage you want to get down as much as possible as this is mainly what produces the heat. If you're just playing videos - find a heavy to play HD video and just keep knocking it down until you can't play it anymore to find your threshold. You'll need to do some stability testing if you're going to knock the voltage down too. Turning off the L2 cache can reduce the heat considerably (and stability/voltage requirements too) - but at a performance impact. But then - as long as it plays what you want it to play...</div>
<div><br></div><div>- If you have onboard graphics - consider using this instead of an external card to reduce heat/power requiments. </div><div><br></div><div>- Noise is reduced exponentially. So tucking it away in a corner and having some longer cables running to it can make quite a difference once you're sitting on a chair. My main box is tucked behind my TV unit, which adds considerable shielding. My other is tucked under my bed - so I can't hear it at all either.</div>
<div><br></div><div>Hope this helps!</div><div><br></div><div>Spode from his Abode<br><br><div class="gmail_quote">On Wed, Nov 2, 2011 at 10:59 AM, Paul Littlefield <span dir="ltr"><<a href="mailto:info@paully.co.uk">info@paully.co.uk</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex;"><div class="im">On 02/11/11 00:22, nic dan wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
Try underclocking/undervolting to save power/thus heat<br>
</blockquote>
<br></div>
My AMD Phenom(tm) II X4 965 CPU can use the Linux kernel's processor drivers (SpeedStep or PowerNow) to automatically reduce the frequency of speed when idle.<br>
<br>
Here is a dump of the kernel log showing 4 different processor performance states and most of the time my CPU runs at 1/4 of its' full speed, saving power and reducing heat.<br>
<br>
Nice.<br>
<br>
kernel: Detected 3415.790 MHz processor.<br>
kernel: powernow-k8: 0 : pstate 0 (3400 MHz)<br>
kernel: powernow-k8: 1 : pstate 1 (2700 MHz)<br>
kernel: powernow-k8: 2 : pstate 2 (2200 MHz)<br>
kernel: powernow-k8: 3 : pstate 3 (800 MHz)<br>
<br>
paully@mythbuntu-server2:~$ cat /proc/cpuinfo |grep 'MHz'<br>
cpu MHz : 800.000<br>
cpu MHz : 800.000<br>
cpu MHz : 800.000<br>
cpu MHz : 800.000<br>
<br>
:-)<div class="im HOEnZb"><br>
<br>
-- <br>
<br>
Paul Littlefield<br>
<br>
Telephone: <a href="tel:07801%20125705" value="+447801125705" target="_blank">07801 125705</a><br>
Facsimile: <a href="tel:08719%20896021" value="+448719896021" target="_blank">08719 896021</a><br>
Email: <a href="mailto:info@paully.co.uk" target="_blank">info@paully.co.uk</a><br>
Web: <a href="http://www.paully.co.uk" target="_blank">www.paully.co.uk</a><br>
Skype: paul_littlefield<br>
Twitter: paullittlefield<br>
Wiki: <a href="http://wiki.indie-it.com/index.php?title=Special:AllPages" target="_blank">http://wiki.indie-it.com/<u></u>index.php?title=Special:<u></u>AllPages</a><br>
Blog: <a href="http://www.littlefield.info" target="_blank">http://www.littlefield.info</a><br>
<br>
Paul Littlefield is environmentally responsible. Please consider the environment before printing this email. This email and any attachment is intended for the named addressee only, or person authorised to receive it on their behalf. The content should be treated as confidential and the recipient may not disclose this message or any attachment to anyone else without authorisation. If this transmission is received in error please notify the sender immediately and delete this message from your email system. All electronic transmissions to and from me are recorded and may be monitored. Finally, the recipient should check this email and any attachments for viruses. Paul Littlefield accepts no liability for any damage caused by any virus transmitted by this email.<br>
<br></div><div class="HOEnZb"><div class="h5">
______________________________<u></u>_________________<br>
Kent mailing list<br>
<a href="mailto:Kent@mailman.lug.org.uk" target="_blank">Kent@mailman.lug.org.uk</a><br>
<a href="https://mailman.lug.org.uk/mailman/listinfo/kent" target="_blank">https://mailman.lug.org.uk/<u></u>mailman/listinfo/kent</a><br>
</div></div></blockquote></div><br></div>