klogd: usb 3-3: new high speed USB device using ehci_hcd and address 16 klogd: usb 3-3: New USB device found, idVendor=090c, idProduct=1000 klogd: usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 klogd: usb 3-3: Product: USB DISK klogd: usb 3-3: Manufacturer: SMI Corporation klogd: usb 3-3: SerialNumber: AA04012700021479 klogd: usb 3-3: configuration #1 chosen from 1 choice klogd: scsi15 : SCSI emulation for USB Mass Storage devices klogd: scsi 15:0:0:0: Direct-Access Flash Drive SM_USB20 1100 PQ: 0 ANSI: 0 CCS klogd: sd 15:0:0:0: Attached scsi generic sg6 type 0 klogd: sd 15:0:0:0: [sdf] 15858688 512-byte logical blocks: (8.11 GB/7.56 GiB) klogd: sd 15:0:0:0: [sdf] Write Protect is off klogd: sd 15:0:0:0: [sdf] Assuming drive cache: write through klogd: sd 15:0:0:0: [sdf] Assuming drive cache: write through klogd: sdf: sdf1 sdf2 sdf3 klogd: sd 15:0:0:0: [sdf] Assuming drive cache: write through klogd: sd 15:0:0:0: [sdf] Attached SCSI removable disk klogd: usb 3-3: reset high speed USB device using ehci_hcd and address 16 klogd: usb 3-3: device descriptor read/64, error -110 klogd: usb 3-3: device descriptor read/64, error -110 klogd: usb 3-3: reset high speed USB device using ehci_hcd and address 16 klogd: usb 3-3: device descriptor read/64, error -110 klogd: usb 3-3: device descriptor read/64, error -110 klogd: usb 3-3: reset high speed USB device using ehci_hcd and address 16 klogd: usb 3-3: device not accepting address 16, error -110 klogd: usb 3-3: reset high speed USB device using ehci_hcd and address 16 klogd: usb 3-3: device not accepting address 16, error -110 klogd: usb 3-3: USB disconnect, address 16 klogd: sd 15:0:0:0: Device offlined - not ready after error recovery klogd: sd 15:0:0:0: [sdf] Unhandled error code klogd: sd 15:0:0:0: [sdf] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK klogd: end_request: I/O error, dev sdf, sector 0 klogd: __ratelimit: 51 callbacks suppressed klogd: Buffer I/O error on device sdf, logical block 0 klogd: lost page write due to I/O error on sdf klogd: Buffer I/O error on device sdf, logical block 1 klogd: lost page write due to I/O error on sdf klogd: Buffer I/O error on device sdf, logical block 2 klogd: lost page write due to I/O error on sdf klogd: Buffer I/O error on device sdf, logical block 3 klogd: lost page write due to I/O error on sdf klogd: Buffer I/O error on device sdf, logical block 4 klogd: lost page write due to I/O error on sdf klogd: Buffer I/O error on device sdf, logical block 5 klogd: lost page write due to I/O error on sdf klogd: Buffer I/O error on device sdf, logical block 6 klogd: lost page write due to I/O error on sdf klogd: Buffer I/O error on device sdf, logical block 7 klogd: lost page write due to I/O error on sdf klogd: Buffer I/O error on device sdf, logical block 8 klogd: lost page write due to I/O error on sdf klogd: Buffer I/O error on device sdf, logical block 9 klogd: lost page write due to I/O error on sdf klogd: sd 15:0:0:0: [sdf] Unhandled error code klogd: sd 15:0:0:0: [sdf] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK klogd: end_request: I/O error, dev sdf, sector 240 klogd: sdf: detected capacity change from 8119648256 to 0 klogd: usb 3-3: new high speed USB device using ehci_hcd and address 17 klogd: usb 3-3: device descriptor read/64, error -110 klogd: usb 3-3: device descriptor read/64, error -110 klogd: usb 3-3: new high speed USB device using ehci_hcd and address 18 klogd: usb 3-3: device descriptor read/64, error -110 klogd: usb 3-3: device descriptor read/64, error -110 klogd: usb 3-3: new high speed USB device using ehci_hcd and address 19 klogd: usb 3-3: device not accepting address 19, error -110 klogd: usb 3-3: new high speed USB device using ehci_hcd and address 20 klogd: usb 3-3: device not accepting address 20, error -110 klogd: hub 3-0:1.0: unable to enumerate USB device on port 3