[sclug] kinetiZ 7AE-A Mo-Board and MRI 1456 IVS modem

Sat Oct 25 09:05:30 UTC 2003

Hello!

I have trouble getting my modem to work properly.

It is a Mr Modem ISA internal modem with the Rockwell ACFII chipset.
56K ISA modem S/N
00V23Yxxxxxxxxx
(http://www.mri.co.uk/tech-support/driver-lists/modems-nt4.htm)

The Main board uses the ApolloKT133A Chipset.

Between every set (line) of AT commands the modem takes 20 seconds to
respond.

echo ATDT1135232415 > /dev/modem                              works
(with 20 sec delay)

/dev/modem is  /dev/ttyS1  on irq 3 uart16550 (spd_vhi)

Attached is the log from the last boot and some modem response during
the last
dial-up with pppd, options, chat .

                                 WHAT IS WRONG?
                                 HOW can WE set it right?

Every help appreciated!

Bernd

--
Bernd Becker   The Monthly Outlook
Met Office  London Road  Bracknell  Berkshire  RG12 2SZ  United Kingdom
Tel.: +44 (0) 1344 854511 Fax: +44 (0) 1344 854026
E-mail:bernd.becker at metoffice.com  -  http://www.metoffice.com

-------------- next part --------------
Jan  8 23:04:09 linux syslogd 1.4.1: restart.
Jan  8 23:04:10 linux /etc/hotplug/usb.rc[362]: loaded HCD: usb-uhci
Jan  8 23:04:15 linux kernel: klogd 1.4.1, log source = /proc/kmsg started.
Jan  8 23:04:15 linux kernel: Inspecting /boot/System.map-2.4.19-4GB
Jan  8 23:04:15 linux kernel: Loaded 14220 symbols from /boot/System.map-2.4.19-4GB.
Jan  8 23:04:15 linux kernel: Symbols match kernel version 2.4.19.
Jan  8 23:04:15 linux kernel: Loaded 247 symbols from 11 modules.
Jan  8 23:04:15 linux kernel: usb.c: registered new driver usbdevfs
Jan  8 23:04:15 linux kernel: usb.c: registered new driver hub
Jan  8 23:04:15 linux kernel: usb-uhci.c: $Revision: 1.275 $ time 13:56:25 Sep 13 2002
Jan  8 23:04:15 linux kernel: usb-uhci.c: High bandwidth mode enabled
Jan  8 23:04:15 linux kernel: PCI: Found IRQ 3 for device 00:07.2
Jan  8 23:04:15 linux kernel: PCI: Sharing IRQ 3 with 00:07.3
Jan  8 23:04:15 linux kernel: usb-uhci.c: USB UHCI at I/O 0xd400, IRQ 3
Jan  8 23:04:15 linux kernel: usb-uhci.c: Detected 2 ports
Jan  8 23:04:15 linux kernel: usb.c: new USB bus registered, assigned bus number 1
Jan  8 23:04:15 linux kernel: hub.c: USB hub found
Jan  8 23:04:15 linux kernel: hub.c: 2 ports detected
Jan  8 23:04:15 linux kernel: PCI: Found IRQ 3 for device 00:07.3
Jan  8 23:04:15 linux kernel: PCI: Sharing IRQ 3 with 00:07.2
Jan  8 23:04:15 linux kernel: usb-uhci.c: USB UHCI at I/O 0xd800, IRQ 3
Jan  8 23:04:15 linux kernel: usb-uhci.c: Detected 2 ports
Jan  8 23:04:15 linux kernel: usb.c: new USB bus registered, assigned bus number 2
Jan  8 23:04:15 linux kernel: hub.c: USB hub found
Jan  8 23:04:15 linux kernel: hub.c: 2 ports detected
Jan  8 23:04:15 linux kernel: usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
Jan  8 23:04:15 linux kernel: uhci.c: USB Universal Host Controller Interface driver v1.1
Jan  8 23:04:17 linux kernel: PCI: Found IRQ 10 for device 00:07.5
Jan  8 23:04:17 linux kernel: IPv6 v0.8 for NET4.0
Jan  8 23:04:17 linux kernel: IPv6 over IPv4 tunneling driver
Jan  8 23:04:17 linux sshd[509]: Server listening on :: port 22.
Jan  8 23:04:19 linux smpppd[555]: smpppd version 0.78 started
Jan  8 23:04:22 linux /usr/sbin/cron[781]: (CRON) STARTUP (fork ok) 
Jan  8 23:04:26 linux /etc/hotplug/net.agent[518]: No HW description found ... exiting
Jan  8 23:05:05 linux kernel: isapnp: Scanning for PnP cards...
Jan  8 23:05:05 linux kernel: isapnp: No Plug & Play device found
Jan  8 23:05:05 linux kernel: hdc: bad special flag: 0x03
Jan  8 23:05:05 linux kernel: ide-floppy driver 0.99.newide
Jan  8 23:05:05 linux kernel: hdc: no flushcache support
Jan  8 23:05:05 linux kernel: hdc: ATAPI 48X DVD-ROM drive, 512kB Cache
Jan  8 23:05:05 linux kernel: Uniform CD-ROM driver Revision: 3.12
Jan  8 23:05:11 linux kernel: Linux video capture interface: v1.00
Jan  8 23:05:33 linux kdm[877]: pam_unix2: session started for user root, service xdm 
Jan  8 23:05:34 linux gpm[921]: *** info [gpn.c(403)]: 
Jan  8 23:05:34 linux gpm[921]: Started gpm successfully. Entered daemon mode.
Jan  8 23:05:40 linux modprobe: modprobe: Can't locate module sound-slot-1
Jan  8 23:05:40 linux modprobe: modprobe: Can't locate module sound-service-1-0
Jan  8 23:05:40 linux modprobe: modprobe: Can't locate module sound-slot-1
Jan  8 23:05:40 linux modprobe: modprobe: Can't locate module sound-service-1-0
Jan  8 23:07:38 linux su: (to root) root on /dev/pts/1
Jan  8 23:07:38 linux su: pam_unix2: session started for user root, service su 
Jan  8 23:07:38 linux su: pam_unix2: session finished for user root, service su 
Jan  8 23:07:39 linux su: (to root) root on /dev/pts/1
Jan  8 23:07:39 linux su: pam_unix2: session started for user root, service su 
Jan  8 23:07:39 linux su: pam_unix2: session finished for user root, service su 
Jan  8 23:07:39 linux kernel: CSLIP: code copyright 1989 Regents of the University of California
Jan  8 23:07:39 linux kernel: PPP generic driver version 2.4.2
Jan  8 23:07:39 linux pppd[1032]: pppd 2.4.1 started by root, uid 0
Jan  8 23:07:39 linux pppd[1032]: Perms of /dev/modem are ok, no 'mesg n' neccesary.
Jan  8 23:07:40 linux chat[1035]: report (CONNECT)
Jan  8 23:07:40 linux chat[1035]: abort on (BUSY)
Jan  8 23:07:40 linux chat[1035]: abort on (no lines available)
Jan  8 23:07:40 linux chat[1035]: abort on (NO CARRIER)
Jan  8 23:07:40 linux chat[1035]: send (AT^M)
Jan  8 23:07:40 linux chat[1035]: expect (OK)
Jan  8 23:07:49 linux gpm[921]: *** err [mice.c(2026)]: 
Jan  8 23:07:49 linux gpm[921]: imps2: PS/2 mouse failed init
Jan  8 23:07:49 linux gpm[921]: O0o.oops(): [gpm.c(985)]: 
Jan  8 23:07:49 linux gpm[921]: mouse initialization failed
Jan  8 23:07:59 linux chat[1035]: ^M
Jan  8 23:07:59 linux chat[1035]: OK
Jan  8 23:07:59 linux chat[1035]:  -- got it 
Jan  8 23:07:59 linux chat[1035]: send (AT&F^M)
Jan  8 23:07:59 linux chat[1035]: expect (OK)
Jan  8 23:07:59 linux chat[1035]: ^M
Jan  8 23:08:19 linux chat[1035]: ^M
Jan  8 23:08:19 linux chat[1035]: OK
Jan  8 23:08:19 linux chat[1035]:  -- got it 
Jan  8 23:08:19 linux chat[1035]: send (ATDT08454550520^M)
Jan  8 23:08:19 linux chat[1035]: expect (OK)
Jan  8 23:08:19 linux chat[1035]: ^M
Jan  8 23:09:01 linux kernel: ttyS: 1 input overrun(s)
Jan  8 23:09:01 linux chat[1035]: ATDT08454550520^M
Jan  8 23:09:04 linux chat[1035]: alarm
Jan  8 23:09:04 linux chat[1035]: Failed
Jan  8 23:09:05 linux chat[1035]: alarm
Jan  8 23:09:05 linux pppd[1032]: Connect script failed
Jan  8 23:09:36 linux pppd[1032]: Perms of /dev/modem are ok, no 'mesg n' neccesary.
Jan  8 23:09:37 linux chat[1233]: report (CONNECT)
Jan  8 23:09:37 linux chat[1233]: abort on (BUSY)
Jan  8 23:09:37 linux chat[1233]: abort on (no lines available)
Jan  8 23:09:37 linux chat[1233]: abort on (NO CARRIER)
Jan  8 23:09:37 linux chat[1233]: send (AT^M)
Jan  8 23:09:37 linux chat[1233]: expect (OK)
Jan  8 23:09:56 linux chat[1233]: AT^M^M
Jan  8 23:09:56 linux chat[1233]: OK
Jan  8 23:09:56 linux chat[1233]:  -- got it 
Jan  8 23:09:56 linux chat[1233]: send (AT&F^M)
Jan  8 23:09:56 linux chat[1233]: expect (OK)
Jan  8 23:09:56 linux chat[1233]: ^M
Jan  8 23:10:16 linux chat[1233]: AT&F^M^M
Jan  8 23:10:16 linux chat[1233]: OK
Jan  8 23:10:16 linux chat[1233]:  -- got it 
Jan  8 23:10:16 linux chat[1233]: send (ATDT08454550520^M)
Jan  8 23:10:16 linux chat[1233]: expect (OK)
Jan  8 23:10:16 linux chat[1233]: ^M
Jan  8 23:10:56 linux kernel: ttyS: 1 input overrun(s)
Jan  8 23:10:56 linux chat[1233]: ATDT08454550520^M
Jan  8 23:11:01 linux chat[1233]: alarm
Jan  8 23:11:01 linux chat[1233]: Failed
Jan  8 23:11:02 linux chat[1233]: alarm
Jan  8 23:11:02 linux pppd[1032]: Connect script failed
Jan  8 23:11:33 linux pppd[1032]: Perms of /dev/modem are ok, no 'mesg n' neccesary.
Jan  8 23:11:34 linux chat[1429]: report (CONNECT)
Jan  8 23:11:34 linux chat[1429]: abort on (BUSY)
Jan  8 23:11:34 linux chat[1429]: abort on (no lines available)
Jan  8 23:11:34 linux chat[1429]: abort on (NO CARRIER)
Jan  8 23:11:34 linux chat[1429]: send (AT^M)
Jan  8 23:11:34 linux chat[1429]: expect (OK)
Jan  8 23:11:53 linux chat[1429]: AT^M^M
Jan  8 23:11:53 linux chat[1429]: OK
Jan  8 23:11:53 linux chat[1429]:  -- got it 
Jan  8 23:11:53 linux chat[1429]: send (AT&F^M)
Jan  8 23:11:54 linux chat[1429]: expect (OK)
Jan  8 23:11:54 linux chat[1429]: ^M
Jan  8 23:12:12 linux pppd[1032]: Terminating on signal 2.
Jan  8 23:12:12 linux chat[1429]: SIGINT
Jan  8 23:12:12 linux pppd[1032]: Connect script failed
Jan  8 23:12:13 linux pppd[1032]: Exit.