[Sussex] data aquisition

[John Gregory]

Rob
I can add my recommendation of Amplicon, having just used them when we 
had an emergency with a failed I/O board. Their delivery of a 
replacement was speedy.

John Gregory

Brendan Whelan wrote:

> Rob,
>  
> I had a look around a few weeks ago and found that 
> quasarelectronics.com had a good range of IO cards, at low prices, - 
> some with Linux drivers. A  member of the Brighton Linux Group 
> recommended Amplicon, a local company, and someone else 
> suggested http://www.comedi.org/ for the driver.
>  
> Hope this gets you started, Brendan
>
>     ----- Original Message -----
>     *From:* Rob Boss <mailto:mapseast at tiscali.co.uk>
>     *To:* LUG email list for the Sussex Counties
>     <mailto:sussex at mailman.lug.org.uk>
>     *Sent:* Tuesday, March 22, 2005 9:23 PM
>     *Subject:* [Sussex] data aquisition
>
>     Does anybody have any data aquisition experience with linux
>     ?-software/plus ,suitable isolated hardware  for  temps/
>     pressures/freq/rpm,ect also some control outputs electric motors -
>     (as much as 6 amps possibly)+ switching of relays  realtime
>     rear-end seems to be correct ...for- engine monitoring + control
>     . I have done a small amount of  research but would love to hear
>     from someone with experience or knowlege or a prod in the right
>     direction
>     THANKS
>     Rob Boss
>
>     ------------------------------------------------------------------------
>     _______________________________________________
>     Sussex mailing list
>     Sussex at mailman.lug.org.uk
>     Sussex LUG Website: http://www.sussex.lug.org.uk/
>     http://mailman.lug.org.uk/mailman/listinfo/sussex
>
>------------------------------------------------------------------------
>
>_______________________________________________
>Sussex mailing list
>Sussex at mailman.lug.org.uk
>Sussex LUG Website: http://www.sussex.lug.org.uk/
>http://mailman.lug.org.uk/mailman/listinfo/sussex
>