Linux version 2.4.18-bf2.4 (root@zombie) (gcc version 2.95.4 20011002 (Debian prerelease)) #1 Son Apr 14 09:53:28 CEST 2002 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000dc000 - 00000000000e0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000fff0000 (usable) BIOS-e820: 000000000fff0000 - 000000000fff8000 (ACPI data) BIOS-e820: 000000000fff8000 - 0000000010000000 (ACPI NVS) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) On node 0 totalpages: 65520 zone(0): 4096 pages. zone(1): 61424 pages. zone(2): 0 pages. Local APIC disabled by BIOS -- reenabling. Found and enabled local APIC! Kernel command line: auto BOOT_IMAGE=Linux ro root=301 Initializing CPU#0 Detected 1000.047 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 1992.29 BogoMIPS Memory: 254640k/262080k available (1783k kernel code, 7052k reserved, 549k data, 280k init, 0k highmem) Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes) Inode-cache hash table entries: 16384 (order: 5, 131072 bytes) Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes) Page-cache hash table entries: 65536 (order: 6, 262144 bytes) CPU: Before vendor init, caps: 0387fbff 00000000 00000000, vendor = 0 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K CPU: After vendor init, caps: 0387fbff 00000000 00000000 00000000 CPU serial number disabled. Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 0383fbff 00000000 00000000 00000000 CPU: Common caps: 0383fbff 00000000 00000000 00000000 CPU: Intel Pentium III (Coppermine) stepping 06 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. Checking for popad bug... OK. POSIX conformance testing by UNIFIX enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 999.9653 MHz. ..... host bus clock speed is 133.3286 MHz. cpu: 0, clocks: 1333286, slice: 666643 CPU0 mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel PCI: PCI BIOS revision 2.10 entry at 0xfdb01, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Using IRQ router VIA [1106/0686] at 00:07.0 PCI: Disabling Via external APIC routing Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd VFS: Diskquotas version dquot_6.4.0 initialized Journalled Block Device driver loaded vga16fb: initializing vga16fb: mapped to 0xc00a0000 Console: switching to colour frame buffer device 80x30 fb0: VGA16 VGA frame buffer device pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A Real Time Clock Driver v1.10e block: 128 slots per queue, batch=32 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller on PCI bus 00 dev 39 VP_IDE: chipset revision 16 VP_IDE: not 100% native mode: will probe irqs later ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: VIA vt82c686a (rev 22) IDE UDMA66 controller on pci00:07.1 ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio hda: QUANTUM FIREBALLP AS40.0, ATA DISK drive hdb: SAMSUNG DVD-ROM SD-612, ATAPI CD/DVD-ROM drive hdc: GoldStar CD-RW CED-8080B, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: 78177792 sectors (40027 MB) w/1902KiB Cache, CHS=4866/255/63 hdb: ATAPI 32X DVD-ROM drive, 512kB Cache Uniform CD-ROM driver Revision: 3.12 hdc: ATAPI 32X CD-ROM CD-R/RW drive, 2048kB Cache ide-floppy driver 0.97.sv Partition check: hda: hda1 hda2 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 Loading I2O Core - (c) Copyright 1999 Red Hat Software I2O configuration manager v 0.04. (C) Copyright 1999 Red Hat Software loop: loaded (max 8 devices) Compaq CISS Driver (v 2.4.5) HDLC support module revision 1.02 for Linux 2.4 Cronyx Ltd, Synchronous PPP and CISCO HDLC (c) 1994 Linux port (c) 1998 Building Number Three Ltd & Jan "Yenya" Kasprzak. ide-floppy driver 0.97.sv Promise Fasttrak(tm) Softwareraid driver 0.03beta: No raid array found Highpoint HPT370 Softwareraid driver for linux version 0.01 No raid array found SCSI subsystem driver Revision: 1.00 Red Hat/Adaptec aacraid driver, Apr 14 2002 DC390: 0 adapters found 3ware Storage Controller device driver for Linux v1.02.00.016. 3w-xxxx: No cards with valid units found. request_module[scsi_hostadapter]: Root fs not mounted request_module[scsi_hostadapter]: Root fs not mounted i2o_scsi.c: Version 0.0.1 chain_pool: 0 bytes @ c1404f00 (512 byte buffers X 4 can_queue X 0 i2o controllers) NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 2048 buckets, 16Kbytes TCP: Hash tables configured (established 16384 bind 16384) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. cramfs: wrong magic FAT: bogus logical sector size 0 reiserfs: checking transaction log (device 03:01) ... Warning, log replay starting on readonly filesystem reiserfs: replayed 63 transactions in 2 seconds Using r5 hash to sort names ReiserFS version 3.6.25 VFS: Mounted root (reiserfs filesystem) readonly. Freeing unused kernel memory: 280k freed Adding Swap: 514072k swap-space (priority -1) Removing [10 237108 0x0 SD]..<4>done Removing [10 237102 0x0 SD]..<4>done Removing [10 237007 0x0 SD]..<4>done Removing [10 237006 0x0 SD]..<4>done Removing [10 236997 0x0 SD]..<4>done Removing [10 236964 0x0 SD]..<4>done There were 6 uncompleted unlinks/truncates. Completed usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb-uhci.c: $Revision: 1.275 $ time 10:29:43 Apr 14 2002 usb-uhci.c: High bandwidth mode enabled PCI: Found IRQ 10 for device 00:07.3 PCI: Sharing IRQ 10 with 00:07.2 PCI: Sharing IRQ 10 with 00:11.0 usb-uhci.c: USB UHCI at I/O 0xd800, IRQ 10 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected PCI: Found IRQ 10 for device 00:07.2 PCI: Sharing IRQ 10 with 00:07.3 PCI: Sharing IRQ 10 with 00:11.0 usb-uhci.c: USB UHCI at I/O 0xd400, IRQ 10 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 2 ports detected usb-uhci.c: v1.275:USB Universal Host Controller Interface driver usb.c: registered new driver keyboard usbkbd.c: :USB HID Boot Protocol keyboard driver natsemi.c:v1.07 1/9/2001 Written by Donald Becker http://www.scyld.com/network/natsemi.html (unofficial 2.4.x kernel port, version 1.07+LK1.0.14, Nov 27, 2001 Jeff Garzik, Tjeerd Mulder) PCI: Found IRQ 11 for device 00:0e.0 eth0: NatSemi DP8381[56] at 0xd0927000, 00:40:f4:58:47:f6, IRQ 11. hub.c: USB new device connect on bus2/1, assigned device number 2 input0: BTC USB Multimedia Keyboard on usb2:2.0 Creative EMU10K1 PCI Audio Driver, version 0.18, 10:29:21 Apr 14 2002 PCI: Found IRQ 9 for device 00:0f.0 emu10k1: EMU10K1 rev 8 model 0x8040 found, IO at 0xcc00-0xcc1f, IRQ 9 ac97_codec: AC97 Audio codec, id: 0x8384:0x7609 (SigmaTel STAC9721/23) hub.c: USB new device connect on bus2/2, assigned device number 3 usb.c: USB device 3 (vend/prod 0x46d/0xc001) is not claimed by any active driver. usb.c: registered new driver hiddev usb.c: registered new driver hid input1,hiddev0: USB HID v1.00 Pointer [BTC BTC] on usb2:2.1 input2: USB HID v1.00 Mouse [Logitech Logitech] on usb2:3.0 hid-core.c: v1.8 Andreas Gal, Vojtech Pavlik hid-core.c: USB HID support drivers usb.c: registered new driver usb_mouse usbmouse.c: v1.6:USB HID Boot Protocol mouse driver mice: PS/2 mouse device common for all mice eth0: link up. eth0: Setting full-duplex based on negotiated link capability. apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16) isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found AWE32: No ISAPnP cards found AWE32: not detected eth0: Autonegotiation advertising 0x5e1 partner 0x00. eth0: link down. eth0: Autonegotiation advertising 0x5e1 partner 0x45e1. eth0: link up. isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Soundblaster audio driver Copyright (C) by Hannu Savolainen 1993-1996 sb: No ISAPnP cards found, trying standard ones... sb: dsp reset failed. eth0: Autonegotiation advertising 0x5e1 partner 0x00. eth0: link down. eth0: Autonegotiation advertising 0x5e1 partner 0x45e1. eth0: link up. eth0: Autonegotiation advertising 0x5e1 partner 0x45e1. parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE] parport_pc: Via 686A parallel port: io=0x378