[Bradford] FABLAB visit -new date!!

[David Carpenter]

Yeah, sorry Phil (and others that don't know what I'm talking about)
http://www.centreofmanufacturingexcellence.com/fab-lab/
Cheers
David

On 4 February 2013 12:39, D.Bolton  U0970268 <U0970268 at unimail.hud.ac.uk> wrote:
> Hi folk,
>
> If you search for "fablab airedale" at http://openstreetmap.org then you will get the exact location.
>
> There is car parking in the cobbled courtyard, with some more spaces in front of the mill.
>
> Also, Fablab can easily be reached by train, as it is oly a 5 minute walk from Kieghley station.
>
> It is a great place (clean, spacious, warm) - with friendly staff.  The CNC machines are relatively small and low power, apart for the v.large CNC router.  However the 3D printers work well.
>
> Have a good trip :-)
>
> David
>
> ps.  I had hoped to come along to ar BradLUG meeting last month (from Huddersfield) - but was beaten by the weather.  I may be able to get along this month (clashes permitting).
>
> ________________________________________
> From: bradford-bounces at mailman.lug.org.uk [bradford-bounces at mailman.lug.org.uk] on behalf of Philip Wyett [philip.wyett at cohere-tech.co.uk]
> Sent: 04 February 2013 12:15
> To: bradford at mailman.lug.org.uk
> Subject: Re: [Bradford] FABLAB visit -new date!!
>
> Hi David,
>
> Could you offer further data re FABLAB. Location and any website(s), so
> others and myself could do a little research. Forgive me now if I have missed
> the data somewhere.
>
> Regards
>
> Phil
>
> On Monday 04 Feb 2013 12:04:26 David Carpenter wrote:
>> Sorry, folks I'm not explaining myself all that well here :-(
>>
>> If you turn up on the 9th, you should still get shown around and
>> looked after, like any member of the public that just turned up on
>> spec. It's just that on the 16th, the staff member that they think
>> will have the best connection with us will be on duty. (i.e. the one
>> who mist understands Raspberry Pi, Linux, etc).
>>
>> Is it worth people posting to the list to tell us the date they are
>> planning on going? Dave S and I are going on the 16th so far.
>>
>> Cheers
>> David
>>
>> On 4 February 2013 11:12, Nick Rhodes <nick at ngrhodes.co.uk> wrote:
>> > I can't do 16th.
>> > Would of liked to be shown round TBH.
>> >
>> > Cheers, Nick
>> >
>> >
>> > On 4 February 2013 11:09, David Carpenter <david.carpenter at nornir.co.uk>
>> >
>> > wrote:
>> >> When can't you make Nick? 9th or the 16th?
>> >>
>> >> Just to re-iterate the 16th of Feb is the day FabLab is expecting a
>> >> group from BradLUG. Our previous tentative arrangement had been Feb
>> >> 9th (subject to FabLab's agreement). Since people have been planning
>> >> to go on the 9th, and the service is an open. and  public one, then
>> >> there is no reason for people planning to go on the 9th not to go,
>> >> UNLESS you want to go the following week, when FabLab will have a
>> >> member of staff who available just for us.
>> >>
>> >> Cheers
>> >> David
>> >>
>> >> On 4 February 2013 10:39, Nick Rhodes <nick at ngrhodes.co.uk> wrote:
>> >> > Not sure if I can make it yet,
>> >> > Car is due for some work to its brakes, supposed to be fixing them with
>> >> > my
>> >> > brother that day, will see if rearrange.
>> >> >
>> >> > Cheers, Nick
>> >> >
>> >> >
>> >> > On 2 February 2013 19:03, John R. Hudson <j.r.hudson at virginmedia.com>
>> >> >
>> >> > wrote:
>> >> >> A pity as I have another appointment on the 16th.
>> >> >>
>> >> >> Look forward to the reports.
>> >> >>
>> >> >> John
>> >> >> --
>> >> >>
>> >> >> On Sat, 2013-02-02 at 17:35 +0000, David Carpenter wrote:
>> >> >> > Hi All
>> >> >> >
>> >> >> > Dropped into FABLAB today to see about our arranged visit.
>> >> >> >
>> >> >> > They would prefer if we turned up on mass the following week;
>> >> >> >
>> >> >> > Feb 16th 10.30.
>> >> >> >
>> >> >> > We'll get shown around for an hour, then we can talk ideas. They are
>> >> >> > keen to find out more about Linux, Raspberry Pi's, Arduino, all that
>> >> >> > stuff, so could be good opportunities for people here.
>> >> >> >
>> >> >> > If you can't make the 16th, you can just drop in any Saturday
>> >> >> > between
>> >> >> > 9.30
>> >> >> >
>> >> >> > _______________________________________________
>> >> >> > Bradford mailing list
>> >> >> > Bradford at mailman.lug.org.uk
>> >> >> > https://mailman.lug.org.uk/mailman/listinfo/bradford
>> >> >>
>> >> >> _______________________________________________
>> >> >> Bradford mailing list
>> >> >> Bradford at mailman.lug.org.uk
>> >> >> https://mailman.lug.org.uk/mailman/listinfo/bradford
>> >> >
>> >> > _______________________________________________
>> >> > Bradford mailing list
>> >> > Bradford at mailman.lug.org.uk
>> >> > https://mailman.lug.org.uk/mailman/listinfo/bradford
>> >
>> > _______________________________________________
>> > Bradford mailing list
>> > Bradford at mailman.lug.org.uk
>> > https://mailman.lug.org.uk/mailman/listinfo/bradford
>>
>> _______________________________________________
>> Bradford mailing list
>> Bradford at mailman.lug.org.uk
>> https://mailman.lug.org.uk/mailman/listinfo/bradford
>
> [”THE]
> _______________________________________________
> Bradford mailing list
> Bradford at mailman.lug.org.uk
> https://mailman.lug.org.uk/mailman/listinfo/bradford