[Gllug] Frozen machine?

[robin.c.smith at bt.com]

I tried to install a vt100 emulator on my old Psion 3c but I couldn't get
the software activated.
Any suggestions where I can find a working vt100 free emulator for the Psion
3c.

Robin

-----Original Message-----
From: Bruce Richardson [mailto:itsbruce at uklinux.net]
Sent: 13 February 2002 16:24
To: gllug at linux.co.uk
Subject: RE: [Gllug] Frozen machine?


On 2/13/02, 3:49:37 PM, "Wulf Forrester-Barker" <wulf.f-b at uhl.nhs.uk> wrote 
regarding RE: [Gllug] Frozen machine?:


> Voila... everything is back to life. Thanks also for the other replies,
> which were all more or less along the same lines.

Another useful thing is to run a getty on one of your serial ports (with 
most distributions this is as simple as uncommenting a line in 
/etc/inittab and then runnint init -q).  Then, assuming you have 
something that can do a terminal session over a serial line, you can get 
in even if networking is down.  

I use my Visor or one of the Psions we have at work but you can also do 
it with a laptop and a null modem cable.

-- 

Bruce

-- 
Gllug mailing list  -  Gllug at linux.co.uk
http://list.ftech.net/mailman/listinfo/gllug

-- 
Gllug mailing list  -  Gllug at linux.co.uk
http://list.ftech.net/mailman/listinfo/gllug