[Gllug] SanDisk SDDR-31 card reader and Linux
Eric Lee
ericlee at labourstart.org
Sat Jan 4 20:57:00 UTC 2003
My SanDisk SDDR-31 is not successfully reading a Compact Flash card in
my Linux PC, running Red Hat 7.3.
I know that the CF card is fine, as I can read it through my Hp
PhotoSmart 7550 printer.
I know that the SanDisk SDDR-31 works, because I connected it with no
problem to my Windows PC and it read the card.
I ran mount /dev/sda1 /mnt/cf, and here's what I see in
/var/logs/messages:
Jan 4 20:03:19 localhost kernel: hub.c: connect-debounce failed, port 1
disabled
Jan 4 20:03:24 localhost kernel: hub.c: USB new device connect on
bus2/1, assigned device number 3
Jan 4 20:03:24 localhost kernel: usb.c: USB device 3 (vend/prod
0x781/0x2) is not claimed by any active driver.
Jan 4 20:03:27 localhost /etc/hotplug/usb.agent: Setup usb-storage for
USB product 781/2/9
Jan 4 20:03:27 localhost kernel: Initializing USB Mass Storage
driver...
Jan 4 20:03:27 localhost kernel: usb.c: registered new driver
usb-storage
Jan 4 20:03:27 localhost kernel: scsi2 : SCSI emulation for USB Mass
Storage devices
Jan 4 20:03:27 localhost kernel: Vendor: SanDisk Model: ImageMate
II Rev: 1.30
Jan 4 20:03:27 localhost kernel: Type:
Direct-Access ANSI SCSI revision: 02
Jan 4 20:03:27 localhost kernel: Attached scsi removable disk sdb at
scsi2, channel 0, id 0, lun 0
Jan 4 20:03:27 localhost kernel: sdb : READ CAPACITY failed.
Jan 4 20:03:27 localhost kernel: sdb : status = 1, message = 00, host =
0, driver = 08
Jan 4 20:03:27 localhost kernel: Current sd00:00: sense key Not Ready
Jan 4 20:03:27 localhost kernel: Additional sense indicates Medium not
present
Jan 4 20:03:27 localhost kernel: sdb : block size assumed to be 512
bytes, disk size 1GB.
Jan 4 20:03:27 localhost kernel: sdb: I/O error: dev 08:10, sector 0
Jan 4 20:03:27 localhost kernel: I/O error: dev 08:10, sector 0
Jan 4 20:03:27 localhost kernel: unable to read partition table
Jan 4 20:03:27 localhost kernel: USB Mass Storage support registered.
Any ideas? Thanks.
Eric
--
Eric Lee
Full contact details: http://www.labourstart.org/contact.shtml
--
Gllug mailing list - Gllug at linux.co.uk
http://list.ftech.net/mailman/listinfo/gllug
More information about the GLLUG
mailing list