[Gllug] Getting my Dreamcast to boot 2.6.14

[Adrian McMenamin]

(This is a general Linux question, honest)

I get quite far with this on my Dreamcast and then get this:

[4294669.303000] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[4294670.306000] Sending DHCP requests ., OK
[4294671.315000] IP-Config: Got DHCP answer from 192.168.61.50, my
address is 192.168.61.55
[4294671.325000] IP-Config: Complete:
[4294671.326000]       device=eth0, addr=192.168.61.55,
mask=255.255.255.224, gw=255.255.255.255,
[4294671.330000]      host=192.168.61.55, domain=, nis-domain=(none),
[4294671.331000]      bootserver=192.168.61.50,
rootserver=192.168.61.50, rootpath=
[4294671.337000] Looking up port of RPC 100003/2 on 192.168.61.50
[4294671.348000] Looking up port of RPC 100005/1 on 192.168.61.50
[4294671.458000] VFS: Mounted root (nfs filesystem).
[4294671.460000] Freeing unused kernel memory: 72k freed
grep: /proc/mounts: No such file or directory
grep: /proc/mounts: No such file or directory
Populating /dev using udev... done
Initializing random number generator... done.
Starting network...
run-parts: failed to open directory /etc/network/if-pre-up.d: No such
file or directory

(The DC then hangs)

I have never seen these Starting network and run-parts messages before -
can anyone tell me where they come from and what they're about?

-- 
Gllug mailing list  -  Gllug at gllug.org.uk
http://lists.gllug.org.uk/mailman/listinfo/gllug