[Gllug] lm_sensors help

[Wiehe, Simon]

> Peter Joanes wrote
>
> Are you running all the necessary kernel support? 

I ran sensors-detect and it identified 3 entries into modules.

The motherboard uses the AMD756 chipset and the sensors output is here.

w83782d-i2c-0-2d
Adapter: SMBus AMD756 adapter at 50e0
VCore:     +1.76 V  (min =  +1.66 V, max =  +1.82 V)              
VCache:    +2.48 V  (min =  +2.26 V, max =  +2.75 V)              
Vcc3:      +3.31 V  (min =  +3.14 V, max =  +3.46 V)              
+5V:       +4.95 V  (min =  +4.73 V, max =  +5.24 V)              
+12V:     +12.28 V  (min = +10.82 V, max = +13.19 V)              
-12V:     -11.87 V  (min = -13.18 V, max = -10.88 V)              
-5V:       -5.00 V  (min =  -5.25 V, max =  -4.75 V)              
+V5SB:     +5.11 V  (min =  +4.73 V, max =  +5.24 V)              
Battery:   +3.22 V  (min =  +2.40 V, max =  +3.60 V)              
Case temperature:
             +32°C  (high =   +40°C, hyst =   +37°C)   sensor = thermistor           
CPU temperature:
           +51.5°C  (high =   +70°C, hyst =   +65°C)   sensor = thermistor           
vid:      +1.750 V  (VRM Version 9.0)
alarms:   
beep_enable:
          Sound alarm disabled

eeprom-i2c-0-52
Adapter: SMBus AMD756 adapter at 50e0
Memory type:            SDR SDRAM DIMM
Memory size (MB):       256

eeprom-i2c-0-50
Adapter: SMBus AMD756 adapter at 50e0
Memory type:            SDR SDRAM DIMM
Memory size (MB):       256

I have put ignore lines in sensors.conf for the fans at the moment.

Any ideas how I would identify any other sensor chips to load the modules for ?

Thanks

Simon

==============================================================================
Please access the attached hyperlink for an important electronic communications disclaimer: 

http://www.csfb.com/legal_terms/disclaimer_external_email.shtml

==============================================================================

-- 
Gllug mailing list  -  Gllug at gllug.org.uk
http://lists.gllug.org.uk/mailman/listinfo/gllug