[Gllug] Abnormal PSUs

[Matthew King]

Chris Bell <chrisbell at overview.demon.co.uk> writes:

> On Wed 01 Mar, Matthew King wrote:
>
>> Not strictly Linux-based, but I'll be running Linux on the box so there
>> is *some* relevance - I need to replace a faulty PSU which is not the
>> size of a standard ATX supply. Its dimensions are 126x63mm (from memory
>> - could be slightly off).
>> 
>    You do not mention the current and power ratings. I have two unused
> "Enermax" mini ATX PSU's here, approx 126 x 100 x 63 mm, mains in at one
> (small) end, output cables at the other, fan on one of the largest faces is
> about 6mm proud including fan guard.  Ratings are:

The power plugs into the 125x63mm side, which is also where the screws go.

> +3.3V 6A
7A

> +5V   12A
12A

> +12V  5A
5A

> -12V  0.3A
0.3A

> +5Vsb 1.2A standby power
0.8A

> 3 x HDD connector
> 1 x FDD connector
> 1 x ATX connector

Dunno about these. I cut them off in a fit of pique.

It needs to power one HDD and one mobo, though, so that will be sufficient.

> Model ED150S-V  which probably means that it is rated at about 150
> watts

This old one is an "Enhance Electronics" SFX-1215H, also rated at 150W,
so yours will most likely make a perfectly adequate replacement.

Were you (I am terrible with names, and email also lacks faces, which
just makes things worse) the person who wanted some of our switches?
Could a swap perhaps be arranged?

Matthew

-- 
I must take issue with the term "a mere child," for it has been my
invariable experience that the company of a mere child is infinitely
preferable to that of a mere adult.
                                           --  Fran Lebowitz

-- 
Gllug mailing list  -  Gllug at gllug.org.uk
http://lists.gllug.org.uk/mailman/listinfo/gllug