[Gllug] Computer Random Hanging

[Andy Loates]

High guys,

Since Wednesday my mail/Samba &firewall box has been acting up. I had to 
shut it down as there was some testing being done onthe power supply 
here. Up to then no problems, but since restarting it it has been 
hanging at random intervals and require a reboot.
When it was restarted the cmos settings had gone to default and had to 
be reset.
All the programs seem to be running OK and the logs show no problems.
I'm suspecting some hardware glitch.
Copied below is an snip from kernel messages log file which as far as i 
can see is the only thing out of the ordinary.  This doesnt mean a lot 
to me but it seems to indicate somethings not right.
Can any of you let me know what this means or if it is even relevant

Many thanks

Andy

Jun  8 16:17:12 wizzer kernel: agpgart: Found an AGP 3.0 compliant 
device at 0000:00:00.0.
Jun  8 16:17:12 wizzer kernel: agpgart: Putting AGP V3 device at 
0000:00:00.0 into 4x mode
Jun  8 16:17:12 wizzer kernel: agpgart: Putting AGP V3 device at 
0000:03:00.0 into 4x mode
Jun  8 16:17:12 wizzer kernel: [drm] Setting GART location based on new 
memory map
Jun  8 16:17:12 wizzer kernel: [drm] Loading R300 Microcode
Jun  8 16:17:12 wizzer kernel: [drm] writeback test succeeded in 1 usecs
Jun  8 16:17:26 wizzer gconfd (root-2838): starting (version 2.14.0), 
pid 2838 user 'root'
Jun  8 16:17:26 wizzer gconfd (root-2838): Resolved address 
"xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only 
configuration source at position 0
Jun  8 16:17:26 wizzer gconfd (root-2838): Resolved address 
"xml:readwrite:/root/.gconf" to a writable configuration source at 
position 1
Jun  8 16:17:26 wizzer gconfd (root-2838): Resolved address 
"xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only 
configuration source at position 2
Jun  8 16:17:27 wizzer gconfd (root-2838): Resolved address 
"xml:readwrite:/root/.gconf" to a writable configuration source at 
position 0
Jun  8 16:17:31 wizzer kernel: attempt to access beyond end of device
Jun  8 16:17:31 wizzer kernel: dm-0: rw=0, want=14949763944, limit=313851904
Jun  8 16:17:31 wizzer kernel: attempt to access beyond end of device
Jun  8 16:17:31 wizzer kernel: dm-0: rw=0, want=14949763944, limit=313851904
Jun  8 16:17:31 wizzer kernel: attempt to access beyond end of device
Jun  8 16:17:31 wizzer kernel: dm-0: rw=0, want=14949763944, limit=313851904
Jun  8 16:17:32 wizzer kernel: attempt to access beyond end of device
Jun  8 16:17:32 wizzer kernel: dm-0: rw=0, want=14949763944, limit=313851904
Jun  8 16:17:32 wizzer kernel: attempt to access beyond end of device
Jun  8 16:17:32 wizzer kernel: dm-0: rw=0, want=14949763944, limit=313851904
Jun  8 16:17:32 wizzer kernel: attempt to access beyond end of device
Jun  8 16:17:32 wizzer kernel: dm-0: rw=0, want=14949763944, limit=313851904
Jun  8 16:17:32 wizzer kernel: attempt to access beyond end of device
Jun  8 16:17:32 wizzer kernel: dm-0: rw=0, want=14949763944, limit=313851904
Jun  8 16:17:32 wizzer kernel: attempt to access beyond end of device
Jun  8 16:17:32 wizzer kernel: dm-0: rw=0, want=14949763944, limit=313851904
Jun  8 16:17:32 wizzer kernel: attempt to access beyond end of device
Jun  8 16:17:32 wizzer kernel: dm-0: rw=0, want=14949763944, limit=313851904

-- 
Gllug mailing list  -  Gllug at gllug.org.uk
http://lists.gllug.org.uk/mailman/listinfo/gllug