[Gllug] Celestia C1085 USB phone handset

[Richard Jones]

Sainsburys are flogging this at the moment for 6 quid so of course I
had to get one:

  http://techreviewzone.wordpress.com/2007/01/24/binatone-s-life-celestia-c1085-voip-phone/

Linux sees it as a basic USB audio device.  No idea how to get the
keypad or display working yet (I haven't tried too hard).  When you
plug it in the device display says "CHECK PC", but it still works as a
basic microphone and speaker so you could use it for VOIP.

lsusb says:

  Bus 002 Device 006: ID 19af:6611 S Life Celestia VoIP Phone

dmesg says:

  usb 2-3: new full speed USB device using ohci_hcd and address 5
  usb 2-3: configuration #1 chosen from 1 choice
  ALSA sound/usb/usbaudio.c:2753: 5:1:1: add audio endpoint 0x3
  ALSA sound/usb/usbaudio.c:2753: 5:2:1: add audio endpoint 0x83
  ALSA sound/usb/usbmixer.c:989: [3] FU [Mic Capture Switch] ch = 1, val = 0/1/1
ALSA sound/usb/usbmixer.c:989: [4] FU [PCM Playback Switch] ch = 1, val = 0/1/1
  ALSA sound/usb/usbmixer.c:989: [4] FU [PCM Playback Volume] ch = 1, val = 0/255/1
  input: innoMax?Technology USB AUDIO DEVICE as /class/input/input8
  input,hidraw1: USB HID v1.11 Device [innoMax?Technology USB AUDIO DEVICE] on usb-0000:00:02.0-3
  ALSA sound/usb/usbaudio.c:1327: setting usb interface 1:1
  ALSA sound/usb/usbaudio.c:1327: setting usb interface 2:1
  usb 2-3: USB disconnect, address 5
  ALSA sound/usb/usbaudio.c:669: cannot submit urb (err = -19)
  ALSA sound/usb/usbaudio.c:669: cannot submit urb (err = -19)
  usb 2-3: new full speed USB device using ohci_hcd and address 6
  usb 2-3: configuration #1 chosen from 1 choice
  ALSA sound/usb/usbaudio.c:2753: 6:1:1: add audio endpoint 0x3
  ALSA sound/usb/usbaudio.c:2753: 6:2:1: add audio endpoint 0x83
  ALSA sound/usb/usbmixer.c:989: [3] FU [Mic Capture Switch] ch = 1, val = 0/1/1
  ALSA sound/usb/usbmixer.c:989: [4] FU [PCM Playback Switch] ch = 1, val = 0/1/1
  ALSA sound/usb/usbmixer.c:989: [4] FU [PCM Playback Volume] ch = 1, val = 0/255/1
  input: innoMax?Technology USB AUDIO DEVICE as /class/input/input9
  input,hidraw1: USB HID v1.11 Device [innoMax?Technology USB AUDIO DEVICE] on usb-0000:00:02.0-3
  ALSA sound/usb/usbaudio.c:1327: setting usb interface 1:1
  ALSA sound/usb/usbaudio.c:1327: setting usb interface 2:1
  usb 2-3: USB disconnect, address 6

Rich.

-- 
Richard Jones
Red Hat
-- 
Gllug mailing list  -  Gllug at gllug.org.uk
http://lists.gllug.org.uk/mailman/listinfo/gllug