[Gloucs] Gloucs] Kernel recompile (oh dear)
Guy Edwards
gloucs at mailman.lug.org.uk
Sun Feb 9 01:59:00 2003
well.... I rebuilt the kernel.....
I now have a very secure box. When I boot into the new kernel I've built
it wont let me use the network at all.
I'm told on boot that /dev/pts doesn't exist at least twice and later
that module ip_tables can't be found, which doesn't surprise me as I
thought I'd said yes to putting it into the kernel rather than having it
load as a module.
Isn't /dev/pts rather important? I can still startx fine but the
networks down.... I've stuck some stuff below that might help (lsmod and
dmesg output)
...any ideas as to what I did wrong?
Guy
lsmod
Module Size Used by Not tainted
sr_mod 15832 0 (autoclean) (unused)
floppy 50716 0 (autoclean)
binfmt_misc 6176 1
lp 7008 0
parport_pc 23400 1
parport 27424 1 [lp parport_pc]
iptable_mangle 2168 0 (autoclean) (unused)
ip_conntrack_irc 3280 0 (unused)
ip_conntrack_ftp 4272 0 (unused)
iptable_filter 1740 1 (autoclean)
snd 28420 0
nfsd 73520 0 (autoclean)
ip_vs 82872 0 (autoclean)
supermount 13576 3 (autoclean)
ide-cd 30248 0
cdrom 28928 0 [sr_mod ide-cd]
ide-scsi 9044 0
usb-storage 56312 0 (unused)
scsi_mod 95748 2 [sr_mod ide-scsi usb-storage]
dmesg
Linux version 2.4.19-24mdkcustom (root@linstation.rebelbase) (gcc
version 3.2 (Mandrake Linux 9.0 3.2-1mdk)) #1 SMP Sun Feb 9 00:10:30 GMT
2003
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e4800 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000010000000 (usable)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
256MB LOWMEM available.
found SMP MP-table at 000f7510
hm, page 000f7000 reserved twice.
hm, page 000f8000 reserved twice.
hm, page 0009f000 reserved twice.
hm, page 000a0000 reserved twice.
Advanced speculative caching feature not present
On node 0 totalpages: 65536
zone(0): 4096 pages.
zone(1): 61440 pages.
zone(2): 0 pages.
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
OEM ID: TYAN Product ID: GUINNESS APIC at: 0xFEE00000
Processor #0 Pentium(tm) Pro APIC version 16
I/O APIC #1 Version 17 at 0xFEC00000.
Processors: 1
Kernel command line: BOOT_IMAGE=Testing ro root=302 devfs=mount
hdc=ide-scsi
ide_setup: hdc=ide-scsi
Initializing CPU#0
Detected 1133.385 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 2260.99 BogoMIPS
Memory: 255896k/262144k available (1739k kernel code, 5860k reserved,
568k data, 128k init, 0k highmem)
Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: Before vendor init, caps: 0183fbff c1c7fbff 00000000, vendor = 2
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After vendor init, caps: 0183fbff c1c7fbff 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0183fbff c1c7fbff 00000000 00000000
CPU: Common caps: 0183fbff c1c7fbff 00000000 00000000
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
CPU: Before vendor init, caps: 0183fbff c1c7fbff 00000000, vendor = 2
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After vendor init, caps: 0183fbff c1c7fbff 00000000 00000000
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0183fbff c1c7fbff 00000000 00000000
CPU: Common caps: 0183fbff c1c7fbff 00000000 00000000
CPU0: AMD Athlon(tm) Processor stepping 02
per-CPU timeslice cutoff: 731.13 usecs.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Error: only one processor found.
ENABLING IO-APIC IRQs
Setting 1 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 1 ... ok.
init IO_APIC IRQs
IO-APIC (apicid-pin) 1-0, 1-5, 1-10, 1-11, 1-20, 1-21, 1-22, 1-23 not
connected.
..TIMER: vector=0x31 pin1=2 pin2=0
number of MP IRQ sources: 17.
number of IO-APIC #1 registers: 24.
testing the IO APIC.......................
IO APIC #1......
.... register #00: 01000000
....... : physical APIC id: 01
.... register #01: 00170011
....... : max redirection entries: 0017
....... : PRQ implemented: 0
....... : IO APIC version: 0011
.... register #02: 00000000
....... : arbitration: 00
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 001 01 0 0 0 0 0 1 1 39
02 001 01 0 0 0 0 0 1 1 31
03 001 01 0 0 0 0 0 1 1 41
04 001 01 0 0 0 0 0 1 1 49
05 000 00 1 0 0 0 0 0 0 00
06 001 01 0 0 0 0 0 1 1 51
07 001 01 0 0 0 0 0 1 1 59
08 001 01 0 0 0 0 0 1 1 61
09 001 01 0 0 0 0 0 1 1 69
0a 000 00 1 0 0 0 0 0 0 00
0b 000 00 1 0 0 0 0 0 0 00
0c 001 01 0 0 0 0 0 1 1 71
0d 001 01 0 0 0 0 0 1 1 79
0e 001 01 0 0 0 0 0 1 1 81
0f 001 01 0 0 0 0 0 1 1 89
10 001 01 1 1 0 1 0 1 1 91
11 001 01 1 1 0 1 0 1 1 99
12 001 01 1 1 0 1 0 1 1 A1
13 001 01 1 1 0 1 0 1 1 A9
14 000 00 1 0 0 0 0 0 0 00
15 000 00 1 0 0 0 0 0 0 00
16 000 00 1 0 0 0 0 0 0 00
17 000 00 1 0 0 0 0 0 0 00
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ16 -> 0:16
IRQ17 -> 0:17
IRQ18 -> 0:18
IRQ19 -> 0:19
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1133.4294 MHz.
..... host bus clock speed is 266.6892 MHz.
cpu: 0, clocks: 2666892, slice: 1333446
CPU0<T0:2666880,T1:1333424,D:10,S:1333446,C:2666892>
Waiting on wait_init_idle (map = 0x0)
All processors have done init_idle
PCI: PCI BIOS revision 2.10 entry at 0xfd7e0, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
Unknown bridge resource 0: assuming transparent
PCI->APIC IRQ transform: (B0,I7,P3) -> 19
PCI->APIC IRQ transform: (B0,I12,P0) -> 16
PCI->APIC IRQ transform: (B0,I13,P0) -> 17
PCI->APIC IRQ transform: (B1,I5,P0) -> 18
BIOS failed to enable PCI standards compliance, fixing this error.
I/O APIC: AMD Errata #22 may be present. In the event of instability try
: booting with the "noapic" option.
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS not found.
Starting kswapd
VFS: Diskquotas version dquot_6.5.0 initialized
Journalled Block Device driver loaded
devfs: v1.12a (20020514) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT
SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10e
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
AMD7411: IDE controller on PCI bus 00 dev 39
AMD7411: chipset revision 1
AMD7411: not 100% native mode: will probe irqs later
AMD7411: disabling single-word DMA support (revision < C4)
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
hda: IBM-DJNA-352030, ATA DISK drive
hdc: LITE-ON LTR-12101B, ATAPI CD/DVD-ROM drive
hdd: Pioneer DVD-ROM ATAPIModel DVD-103S 011, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 39876480 sectors (20417 MB) w/1966KiB Cache, CHS=2482/255/63,
UDMA(66)
Partition check:
/dev/ide/host0/bus0/target0/lun0: p1 p2 p4 < p5 p6 p7 p8 >
RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
00:0d.0: 3Com PCI 3c905B Cyclone 100baseTx at 0x1000. Vers LK1.1.16
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 204M
agpgart: Detected AMD 760MP chipset
agpgart: AGP aperture is 64M @ 0xec000000
Creative EMU10K1 PCI Audio Driver, version 0.19, 00:13:31 Feb 9 2003
emu10k1: EMU10K1 rev 4 model 0x20 found, IO at 0x1080-0x109f, IRQ 16
ac97_codec: AC97 codec, id: 0x5452:0x4103 (TriTech TR28023)
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 16384)
Linux IP multicast router 0.06 plus PIM-SM
ip_conntrack version 2.1 (2048 buckets, 16384 max) - 156 bytes per
conntrack
ip_tables: (C) 2000-2002 Netfilter core team
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 121k freed
VFS: Mounted root (ext2 filesystem).
Mounted devfs on /dev
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Mounted devfs on /dev
Freeing unused kernel memory: 128k freed
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,2), internal journal
Adding Swap: 2080376k swap-space (priority -1)
SCSI subsystem driver Revision: 1.00
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: LITE-ON Model: LTR-12101B Rev: LS3G
Type: CD-ROM ANSI SCSI revision: 02
hdd: ATAPI DVD-ROM drive, 512kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,1), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,8), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,5), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,7), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
IPVS: Connection hash table configured (size=4096, memory=32Kbytes)
IPVS: Each connection entry needs 120 bytes at least
IPVS: ipvs loaded.
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
EMU10K1/Audigy soundcard not found or device busy
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
parport0: irq 7 detected
parport0: Printer, Brother HL-1240 series
lp0: using parport0 (polling).
inserting floppy driver for 2.4.19-24mdkcustom
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 2, lun 0
sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
RPC: sendmsg returned error 1
nfs: RPC call returned error 1
RPC: sendmsg returned error 1
nfs: RPC call returned error 1
RPC: sendmsg returned error 1
nfs: RPC call returned error 1
RPC: sendmsg returned error 1
nfs: RPC call returned error 1
request_module[net-pf-10]: waitpid(24716,...) failed, errno 1
RPC: sendmsg returned error 1
nfs: RPC call returned error 1
RPC: sendmsg returned error 1
nfs: RPC call returned error 1