[HLUG] DrayTek adsl router

[Andrew Hodgson]

Hi,

Is it a new router?  Are you using a straight-through cable?  You should
have the switch 1 light on and you should get IP address through DHCP.
Have you tried reseting maching using reset button (you need a paperclip
to get this).

Andrew.

-----Original Message-----
From: herefordshire-bounces at mailman.lug.org.uk
[mailto:herefordshire-bounces at mailman.lug.org.uk] On Behalf Of Graham
Cole
Sent: 18 March 2006 09:06
To: Herefordshire Linux Users Group.
Subject: RE: [HLUG] DrayTek adsl router

The default gateway of the router is given in the book as 192.168.1.1
and I used this in my browser: http://192.168.1.1 but connection was
'refused'. (What is this address? Is it for the router itself?)
 I suppose this refusal was related to the fact that the router has no
light on for the connection to the pc, P1. The WLAN light is on. I
suppose this means the router is prepared for wireless connection only.
I haven't the kit to use wireless so I have made connection by wire.

On Fri, 2006-03-17 at 22:03 +0000, Andrew Hodgson wrote:
> Hi,
> 
> You shouldn't need router tools.
> 
> Can you connect to the HTTP interface?  If using wireless, start with
> wired connection to make sure the whole thing is set up correctly
before
> you move to wireless.
> 
> You can do firmware manipulation via FTP, when I had my unit I just
used
> FTP to put new firmware on the router, I think the router tools is
just
> the firmware upgrade tool which uses TFTP to put the image on, and
there
> is I think also a quick setup tool and a syslog daemon.
> 
> Thanks.
> Andrew.
> 
> -----Original Message-----
> From: herefordshire-bounces at mailman.lug.org.uk
> [mailto:herefordshire-bounces at mailman.lug.org.uk] On Behalf Of Graham
> Cole
> Sent: 17 March 2006 19:41
> To: Herefordshire Linux Users Group.
> Subject: [HLUG] DrayTek adsl router
> 
> I seem to be stuck at the start with the factory re-set putting the
> router on WLAN which I can't use. I have a line to my PC and can ping
to
> the router but I don't have the LED lit up for the connection to the
PC.
> I have no way of installing  'Router Tools' from the disc which needs
a
> Mac or windoze OS. So I can't configure the router. What next? Go
> somewhere to use a windoze PC?
> Day one of broadband.....
> Graham
> 
> 
> _______________________________________________
> Herefordshire mailing list
> Herefordshire at mailman.lug.org.uk
> http://mailman.lug.org.uk/mailman/listinfo/herefordshire
> 
> _______________________________________________
> Herefordshire mailing list
> Herefordshire at mailman.lug.org.uk
> http://mailman.lug.org.uk/mailman/listinfo/herefordshire
> 


_______________________________________________
Herefordshire mailing list
Herefordshire at mailman.lug.org.uk
http://mailman.lug.org.uk/mailman/listinfo/herefordshire