[Klug-general] Slightly OT: router recommendation?

David Halliday david.halliday at gmail.com
Thu Sep 2 09:51:47 UTC 2010


I have previously used draytek: http://www.draytek.co.uk/
<http://www.draytek.co.uk/>for business use, had no real problems with them.
Having said that Netgear I have found to be fairly solid and good quality. I
think they still do two lines (budget models box made from plastic
and business models box made from metal).

If you are used to Netgear and find that it works then the value of going
with the devil you know might be better.

I have had very mixed results with linksys:
http://www.linksysbycisco.com/UK/en/home
<http://www.linksysbycisco.com/UK/en/home>One which was a true trooper (only
out of service as I now have cable) and worked like a dream,
and another which needed to be restarted every 2 - 3 days.

On 2 September 2010 10:43, Mike <kentlug at norgie.net> wrote:

> On Thu, Sep 02, 2010 at 10:34:34AM +0100, Jake Subs wrote:
> > The place I rent office space from is having real problems with their
> > BT ADSL router. It frequently resets to the factory settings (which is
> > problematic if you're mid-web design workshop!!). I _think_ this would
> > be a router problem rather than a BT service issue, though wouldn't
> > swear to it.
> >
> > Can anyone recommend a rock-solid wireless router replacement? I have
> > a netgear at home but only because it was supplied by TalkTalk. The
> > existing router is called a "2wire" BT Business Hub (2700HGV)
> > http://bit.ly/cFMUs5
> >
>
> I guess it depends very much on what you want.  I used to use a NetGear
> DG834.  That was OK as a router (dispite a few peculiorities) but wasn't
> wireless.  I have found NetGear's wireless kit to be crap.
>
> Linksys do nice stuff.  They are low cost and reasonably feature rich.
> If it's just distributing your ADSL via wireless you can't go far wrong
> with one of these.
>
> I currently use a CISCO 877 (it isn't wireless but there are models in
> the 8xx series that do) cause I got hacked off with the DG834s inability
> to do SNMP and I had to hack the DG834 to get it to route the way that I
> wanted.  They run IoS and so are a complete pain in the arse to setup
> and configure.  They are also really expensive (around £300 for a new
> one).  These will give you max flexability though.
>
> Somewhere in the middle (around the £100 mark) come the Zyxel routers,
> they tent to be quite flexable, web managed and mid priced.
>
> I'd go with a Linksys if you don't want to do anything fancy.
>
> Mike.
>
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v1.4.9 (GNU/Linux)
>
> iEYEARECAAYFAkx/cdMACgkQmUrfmTU1ohWiMQCfdC0WTCgHvF7BjMBkVr2+6VwQ
> 6xgAoMZKPNL71lLYBWFyz+qGKKdwMeyh
> =f6XD
> -----END PGP SIGNATURE-----
>
> _______________________________________________
> Kent mailing list
> Kent at mailman.lug.org.uk
> https://mailman.lug.org.uk/mailman/listinfo/kent
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.lug.org.uk/pipermail/kent/attachments/20100902/fe1f2048/attachment-0001.htm>


More information about the Kent mailing list