[Nottingham] TR: gnome toaster

[Bunter Matthew]

All,

Having a prob with GnomeToaster 1.0Beta6 on Red Hat 9

What I'm trying to burn onto CD are files and folders from a windows =
partition, moved into a Linux partition for the copying thereof.

Below is the message that I get :

-------------------------------
GnomeToaster Recording Terminal
blanking CDRW.
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.1.24
cdrecord: Warning: using inofficial libscg transport code version
(schily - Red Hat-scsi-linux-sg.c-1.75-RH '@(#)scsi-linux-sg.c  1.75
02/10/21 Copyright 1997 J. Schilling').
Cdrecord 2.0 (i686-pc-linux-gnu) Copyright (C) 1995-2002 Jrg Schilling
Using libscg version 'schily-0.7'
Device type    : Removable CD-ROM
Version        : 0
Response Format: 1
Vendor_info    : 'MSI     '
Identifikation : 'CD-RW MS-8348   '
Revision       : '150D'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags   : MMC-2 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P
RAW/R96R
Starting to write CD/DVD at speed 12 in real BLANK mode for single
session.
Last chance to quit, starting real write in 9 seconds.   8 seconds.   7
seconds.   6 seconds.   5 seconds.   4 seconds.   3 seconds.   2
seconds.   1 seconds.   0 seconds. Operation starts.
CDRW blanking complete.
Recording 577339392 bytes to CD
GnomeToaster is calling the following command:
cdrecord dev=3D0,0,0 speed=3D2 -data tsize=3D577339392 /tmp/gtoaster
Cdrecord 2.0 (i686-pc-linux-gnu) Copyright (C) 1995-2002 Jrg Schilling
Using libscg version 'schily-0.7'
Device type    : Removable CD-ROM
Version        : 0
Response Format: 1
Vendor_info    : 'MSI     '
Identifikation : 'CD-RW MS-8348   '
Revision       : '150D'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags   : MMC-2 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P
RAW/R96R
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.1.24
cdrecord: Warning: using inofficial libscg transport code version
(schily - Red Hat-scsi-linux-sg.c-1.75-RH '@(#)scsi-linux-sg.c  1.75
02/10/21 Copyright 1997 J. Schilling').
cdrecord: Drive needs to reload the media to return to proper status.
Starting to write CD/DVD at speed 12 in real TAO mode for single
session.
Last chance to quit, starting real write in 9 seconds.   8 seconds.   7
seconds.   6 seconds.   5 seconds.   4 seconds.   3 seconds.   2
seconds.   1 seconds.   0 seconds. Operation starts.cdrecord:
Input/output error. read track info: scsi sendcmd: no error <=3D=3D
CDB:  52 01 00 00 00 FF 00 00 1C 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 21 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x21 Qual 0x00 (logical block address out of range) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.000s timeout 240s
cdrecord: Input/output error. close track/session: scsi sendcmd: no
error
CDB:  5B 00 02 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 2C 04 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x2C Qual 0x04 (current program area is empty) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.000s timeout 480s
cmd finished after 0.000s timeout 480s
=20
Child exited unexpectedly.
CD recording process finished.
------------------------------

I think the problem starts where I have put the <=3D=3D.

The setup of GnomeToaster is the default, nothing has been changed by =
me, it seems to be using cdrao as the writing medium.

This is the first time I've ever tried burning a CD with Linux so =
apologies if I have left out any relevant details.

Regards,

Matt