[Nottingham] New Monitor

[Jim Moore]

At a glance, your monitor native frequency is 1366x768 (which isn't
bad considering it's an uberbudget monitor but still seems a little
low for the screen size - I have a 17" standard ratio which is native
at 1600x1200 and that's a 5 year old HP), so with a bit of number
fiddling, you need to set up your monitor geometry manually (as is
usually the case on widescreens) with the following:

pitch: 0.300mm
measure horizontal and vertical panel dimensions with a tape, you'll
need these numbers for setup as well, because the pixel dimensions
suggest rectangular pixels rather than square - again unusual for a
compiter monitor and bound to make life interesting - what you
actually have there is a HDTV panel with a VGA connector.

HTH

TLP

On 8/8/09, Ron Wilton <ron_w_add at yahoo.co.uk> wrote:
> Hello All
>
> My 4 x 3 monitor went on me earlier this week.
>
> I've just bought a widescreen monitor hoping that it would be alright. It
> works okay, except that the picture quality is not very good. Any ideas on
> what I can do? I've got an acer X193HQ and an using Ubuntu.
>
> Thanks for any help
>
> Ron
>
>
>
>