[Nottingham] New Monitor

Mon Aug 10 20:55:31 UTC 2009

Thanks Jim and Matt

I have tried the command suggested and got the following reply:-

~$ xrandr --addmode XSVGA 1366x768
xrandr: cannot find output "XSVGA"

I have the NVIDIA GeForce2 MX/MX 400 which must be at least 5 years old, so I'm wondering whether this is before the ability of setting up custom screens.

I've also done the following two commands:-

~$ xrandr -q
Screen 0: minimum 320 x 240, current 1024 x 768, maximum 1280 x 1024
default connected 1024x768+0+0 0mm x 0mm
   1280x1024      75.0     60.0  
   1280x960       60.0  
   1152x864       75.0  
   1024x768       75.0     70.0     60.0* 
   832x624        75.0  
   800x600        75.0     72.0     60.0     56.0  
   720x400        70.0  
   640x480        75.0     73.0     67.0     60.0  
   1280x800       60.0  
   1280x768       60.0  
   1280x720       60.0  
   1152x768       55.0  
   960x600        60.0  
   840x525        60.0  
   700x525        70.0     60.0  
   640x512        75.0     60.0  
   720x450        60.0  
   640x400        60.0  
   576x432        75.0  
   640x384        60.0  
   576x384        55.0  
   512x384        75.0     70.0     60.0  
   416x312        75.0  
   400x300        75.0     72.0     60.0     56.0  
   320x240        75.0     73.0     60.0  
~$ xrandr -s 1366x768
Size 1366x768 not found in available modes

Any suggestions?

Thanks

Ron

--- On Mon, 10/8/09, Jim Moore <jmthelostpacket at googlemail.com> wrote:

From: Jim Moore <jmthelostpacket at googlemail.com>
Subject: Re: [Nottingham] New Monitor
To: "Notts GNU/Linux Users Group" <nottingham at mailman.lug.org.uk>
Date: Monday, 10 August, 2009, 12:07 AM

start with:

xrandr --addmode XSVGA
 1366x768

then:

xrandr --output XSVGA --mode 1366×768 --rate 60

Note these are nonpersistent commands (ie they'll only last through
the current session). You might want to add them to xorg.conf (read
the xorg.conf file on how to add xrandr lines to the configuration),
or you can use ~/.xprofile (just append those two xrandr lines to the
file; create an empty xprofile if one doesn't already exist, xorg will
use it if it exists in your home folder).

As mentioned (kudos to Matthew), ATI and NVidia both have GUI
configurations in which setting up custom screens is elementary. I
know from experience (with SuSE Pro 9.3) that the NVidia one does
require you to set the pitch or it'll do weird things with weird
screens (apparently the hardware manufacturers never thought to add
16:9 aspect screens to the default list) /before/ you can add the new
screen resolution.

On 8/9/09, Matthew Tompsett
 <matthewbpt at gmail.com> wrote:
> What kind of video card do you have? If it's an nvidia then you can use the
> nvidia xconfig utility to change the resolution and refresh rates, if not
> then you may have to use the xrandr command line program, google it I can't
> quite remember how to use it but there are guides you can follow,
>
> Matt
>
> 2009/8/9 Ron Wilton <ron_w_add at yahoo.co.uk>
>
>> Thanks for your reply, Jim.
>>
>> How do I make the suggested changes. In Ubuntu there's a Screen Resolution
>> programme, but this does not allow changing the pitch and entering of the
>> actual screen size.
>>
>> Thanks
>>
>>
 Ron
>>
>> --- On *Sat, 8/8/09, Jim Moore <jmthelostpacket at googlemail.com>* wrote:
>>
>>
>> From: Jim Moore <jmthelostpacket at googlemail.com>
>> Subject: Re: [Nottingham] New Monitor
>> To: "Notts GNU/Linux Users Group" <nottingham at mailman.lug.org.uk>
>> Date: Saturday, 8 August, 2009, 7:48 PM
>>
>>
>> At a glance, your monitor native frequency is 1366x768 (which isn't
>> bad considering it's an uberbudget monitor but still seems a little
>> low for the screen size - I have a 17" standard ratio which is
 native
>> at 1600x1200 and that's a 5 year old HP), so with a bit of number
>> fiddling, you need to set up your monitor geometry manually (as is
>> usually the case on widescreens) with the following:
>>
>> pitch: 0.300mm
>> measure horizontal and vertical panel dimensions with a tape, you'll
>> need these numbers for setup as well, because the pixel dimensions
>> suggest rectangular pixels rather than square - again unusual for a
>> compiter monitor and bound to make life interesting - what you
>> actually have there is a HDTV panel with a VGA connector.
>>
>> HTH
>>
>> TLP
>>
>> On 8/8/09, Ron Wilton
>> <ron_w_add at yahoo.co.uk<http://mc/compose?to=ron_w_add@yahoo.co.uk>>
>> wrote:
>> > Hello All
>> >
>> > My 4 x 3 monitor went on me earlier this week.
>> >
>> > I've just bought a widescreen monitor hoping that it would be alright.
>> > It
>> > works okay, except that the picture quality is not very good. Any ideas
>> on
>> > what I can do? I've got an acer X193HQ and an using Ubuntu.
>> >
>> > Thanks for any help
>> >
>> > Ron
>> >
>> >
>> >
>> >
>>
>> _______________________________________________
>> Nottingham mailing list
>> Nottingham at mailman.lug.org.uk<http://mc/compose?to=Nottingham@mailman.lug.org.uk>
>> https://mailman.lug.org.uk/mailman/listinfo/nottingham
>>
>>
>>
>> _______________________________________________
>> Nottingham mailing list
>> Nottingham at mailman.lug.org.uk
>> https://mailman.lug.org.uk/mailman/listinfo/nottingham
>>
>

_______________________________________________
Nottingham mailing list
Nottingham at mailman.lug.org.uk
https://mailman.lug.org.uk/mailman/listinfo/nottingham

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mailman.lug.org.uk/pipermail/nottingham/attachments/20090810/3db31f45/attachment.htm 