[sclug] ToUcam II - Webcam

[Peter Brewer]

Hi all,

We've just purchased a Phillips ToUcam II webcam to run on one of our 
work machines following a SCLUG thread recommendation!!  Unfortunately 
the 'plug and pray' approach didn't work - anyone got any ideas? 

*When we tried to run we got the following error:
gqcam -v /dev/video0
/dev/video0: Function not implemented

*DMESG output :
usb 1-3: new full speed USB device using ohci_hcd and address 5
drivers/usb/media/ov511.c: USB OV518 video device found
drivers/usb/media/ov511.c: Device revision 1
drivers/usb/media/ov511.c: Compression required with OV518...enabling
drivers/usb/media/ov511.c: Sensor is an OV6630AF
drivers/usb/media/ov511.c: Device at usb-0000:00:02.0-3 registered to 
minor 0

*lsusb output:
Bus 003 Device 003: ID 05e3:0660 Genesys Logic, Inc. USB 2.0 Hub
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 005: ID 05a9:0518 OmniVision Technologies, Inc. OV518 WebCam
Bus 001 Device 003: ID 046d:c408 Logitech, Inc. Marble Mouse (4-button)
Bus 001 Device 001: ID 0000:0000

Cheers

Pete and Tim