[Scottish] FW: automount problem
Gallagher, Kevin
K.Gallagher at napier.ac.uk
Fri Oct 21 14:40:58 BST 2005
I discovered that the problem disappeared after SAMBA was switched off.
A posting on the WEB suggested that if SAMBA started first it could
cause RPC problems. Can anyone confirm this?
Kevin
________________________________
From: Gallagher, Kevin
Sent: 21 October 2005 12:31
To: 'scottish at mailman.lug.org.uk'
Subject: automount problem
I have a SUSE Enterprise server from which I export my home directories.
I can logon to a redhat linux client and my home directory mounts ok.
However if I try to ls /home/<id> on my suse server I am told "/bin/ls:
/home/01234567: No such file or directory" . I can mount a share from
another machine on my suse server ok. There is something not quite right
about the suse machine that I can't figure out. Any advise would be most
welcome. I have a listed the fstab, exports and log file entries I get.
/etc/fstab
/dev/cciss/c0d0p2 / reiserfs acl,user_xattr
1 1
/dev/cciss/c0d0p1 swap swap pri=42
0 0
devpts /dev/pts devpts mode=0620,gid=5
0 0
proc /proc proc defaults
0 0
usbfs /proc/bus/usb usbfs noauto
0 0
sysfs /sys sysfs noauto
0 0
/dev/cdrom /media/cdrom subfs
fs=cdfss,ro,procuid,nosuid,nodev,exec,iocharset=utf8 0 0
/dev/sda1 /export/home/t1 ext2
rw,nosuid,auto,rsize=32768,wsize=32768 1 2
/dev/sdb1 /export/home/t2 ext2 defaults
1 2
/etc/exports
/export/home/t1 @fileservers(rw) @workstations(rw) @timesharing(rw)
@pcs(rw) @linux(rw)
/export/home/t2 @linux(rw)
/export/home/o1 @linux(rw)
/test @fileservers(rw) @workstations(rw) @timesharing(rw) @pcs(rw)
@linux(rw)
/var/log/messages
Oct 21 12:32:49 test2 automount[9902]: >> mount server reported tcp not
available, falling back to udp
Oct 21 12:32:49 test2 automount[9902]: >> mount: RPC: Remote system
error - Connection refused
Oct 21 12:32:49 test2 automount[9902]: mount(nfs): nfs: mount failure
test2:/export/home/t1/student/01234567 on /home/01234567
Kevin
This message is intended for the addressee(s) only and should not be read, copied or disclosed to anyone else outwith the University without the permission of the sender.
It is your responsibility to ensure that this message and any attachments are scanned for viruses or other defects. Napier University does not accept liability for any loss
or damage which may result from this email or any attachment, or for errors or omissions arising after it was sent. Email is not a secure medium. Email entering the
University's system is subject to routine monitoring and filtering by the University.
More information about the Scottish
mailing list