[SWLUG] DHCP Client problem
Tim Bonnell
Tim.Bonnell at CarringtonWire.com
Wed May 29 10:17:55 UTC 2002
I have a SuSE 7.2 server at home running DHCP server
I have a Sony Notebook which dual boots SuSE 7.2 qnd XP-pro (spit!)
I have a Windows NT-4 server at work running DHCP server (spit again!)
when I boot my notebook in XP at home or work, I get a valid DHCP lease and
can access the network.
When I boot my Notebook in Linux at work, I get a valid DHCP lease from my
Windows NT-4 server.
When I boot my notebook in Linux at home, I DONT get a valid lease from my
SuSE 7.2 server?
I include below the output from 'ifconfig' on the two different boot
locations.
How could this be? Linux being less helpful than THE-OTHER server?
/* ------- output from Notebook in SuSE 7.2 at work (NT-4 DHCP server) */
eth0 Link encap:Ethernet HWaddr 08:00:46:59:A8:58
inet addr:10.100.64.165 Bcast:10.100.64.255 Mask:255.255.255.0
inet6 addr: fe80::800:4659:a858/10 Scope:Link
inet6 addr: fe80::a00:46ff:fe59:a858/10 Scope:Link
UP BROADCAST NOTRAILERS RUNNING MTU:1500 Metric:1
RX packets:1148 errors:0 dropped:0 overruns:0 frame:0
TX packets:863 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:544905 (532.1 Kb) TX bytes:116528 (113.7 Kb)
Interrupt:10 Base address:0x5800
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
/* ------- output from Notebook in SuSE 7.2 at home (SuSE 7.2 DHCP server)
*/
eth0 Link encap:Ethernet HWaddr 08:00:46:59:A8:58
inet6 addr: fe80::800:4659:a858/10 Scope:Link
inet6 addr: fe80::a00:46ff:fe59:a858/10 Scope:Link
UP BROADCAST NOTRAILERS RUNNING MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:18 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:0 (0.0 b) TX bytes:5452 (5.3 Kb)
Interrupt:10 Base address:0x5800
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:8 errors:0 dropped:0 overruns:0 frame:0
TX packets:8 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:644 (644.0 b) TX bytes:644 (644.0 b)
****** Internet Email Confidentiality ******
Privileged/Confidential Information may be contained in this message. If
you are not the addressee indicated in this message (or responsible for
delivery of the message to such person), you may not copy or deliver this
message to anyone. In such case, you should destroy this message and kindly
notify the sender by reply email. Please advise immediately if you or your
employer do not consent to Internet email for messages of this kind.
Opinions, conclusions and other information in this message that do not
relate to the official business of Carrington Wire Ltd shall be understood
as neither given nor endorsed by it.
********************************************
More information about the Swlug
mailing list