[Watford] Second Hard Disk

[Neel Upadhyaya]

They needed to be added to the fstab.

-- 
MCSE is to computers as McDonalds Certified Chef is to fine cuisine.


On 18/01/2008, walt <walt at helvatron.co.uk> wrote:
> Of course, that makes sense.  So where do I put the mount instructions so
> the drive is available after every boot?
>
> Walter
>
> -----Original Message-----
> From: watford-bounces at mailman.lug.org.uk
> [mailto:watford-bounces at mailman.lug.org.uk] On Behalf Of Neel Upadhyaya
> Sent: 17 January 2008 22:30
> To: watford at mailman.lug.org.uk
> Subject: Re: [Watford] Second Hard Disk
>
> don't mount the drive in /dev do it in /mnt or /media.
>
> dev is rebuit every time you reboot.
>
>
> On 17/01/2008, walt <walt at helvatron.co.uk> wrote:
> > Many thanks.
> >
> > I created a folder in /dev 'hda2' and mounted the drive manually into
> which
> > worked fine.  After a reboot, the folder had disappeared and I had to
> > recreate it and remount the drive.  Will that stay put once I make the
> fstab
> > entry?
> >
> > Although I managed to build this Suse system 3 times now from scratch
> > without looking into a book or checking the web I am still struggling to
> > remember where everything goes.  I even managed to change the partition
> > sizes during the partition phase of the install. Nevertheless, I am
> > beginning to wonder whether I am just not cut out for this Linux lark
> > because once installed I just have no idea how to change hardware etc.
> >
> > I tried to repair a system by moving the disk from one motherboard to
> > another and then applying the repair option from the installation disk
> just
> > like it says in the manual.  It fell over every time.  It even fell over
> > after I moved the disk back to the original system.  I will have to keep
> > windows going because I have no way back at the moment if Linux fails.
> >
> > Anyway, thanks again, Walter
> >
> > -----Original Message-----
> > From: watford-bounces at mailman.lug.org.uk
> > [mailto:watford-bounces at mailman.lug.org.uk] On Behalf Of Neel Upadhyaya
> > Sent: 17 January 2008 20:43
> > To: watford at mailman.lug.org.uk
> > Subject: Re: [Watford] Second Hard Disk
> >
> > Your fstab line should look something like this
> > /dev/sdb1                 /mnt/spare_drive            ext3    defaults
> >        0 0
> >
> > This would mount sdb1 on /mnt/spare_drive as ext3 with the default
> options.
> >
> > On 17/01/2008, walt <walt at helvatron.co.uk> wrote:
> > > Great thanks!  But the hardware detection software reports the disk as
> sdb
> > > although it is ide.  Does the fstab contain the path to the mount point
> of
> > > the other drives?
> > >
> > > Walter
> > >
> > > -----Original Message-----
> > > From: watford-bounces at mailman.lug.org.uk
> > > [mailto:watford-bounces at mailman.lug.org.uk] On Behalf Of Neel Upadhyaya
> > > Sent: 17 January 2008 19:08
> > > To: watford at mailman.lug.org.uk
> > > Subject: Re: [Watford] Second Hard Disk
> > >
> > > if it's ide then you'll need to do something like
> > > mount -t ext3 /dev/hdb1 /path/to/mount/point
> > > SATA:
> > > mount -t ext3 /dev/sdb1 /path/to/mount/point
> > >
> > > Basically:
> > > the sd and hd refer to sata and ide respectively
> > > the b refers to the device 'a' being the first disk, 'b' the second etc.
> > > the 1 refers to the partition (starting at 1).
> > >
> > > Make sure the path you point to exists as an empty dir or it wont mount.
> > >
> > > --
> > > MCSE is to computers as McDonalds Certified Chef is to fine cuisine.
> > >
> > >
> > > On 17/01/2008, walt <walt at helvatron.co.uk> wrote:
> > > > Hi everyone,
> > > >
> > > > How do I get Linux to mount an additional hard disk which I intent to
> > use
> > > > for data storage?
> > > >
> > > > I am using Suse 10.3 and the hardware monitor reports the disk as
> > /dev/sdb
> > > > but when I try to mount it tells me it can't find it and that it cant
> > find
> > > > this in fstab.  Its already portioned to ext3 and I need to get some
> > data
> > > > off it so I don't want to re-partion it. I suspect each partion has to
> > be
> > > > declared in fstab.
> > > >
> > > > I have no idea how to edit this and gnome seems to have no utility to
> > set
> > > > this up either.
> > > >
> > > > Thanks for your help.
> > > > Walter
> > > >
> > > >
> > > > _______________________________________________
> > > > Watford mailing list
> > > > Watford at mailman.lug.org.uk
> > > > https://mailman.lug.org.uk/mailman/listinfo/watford
> > > >
> > >
> > > _______________________________________________
> > > Watford mailing list
> > > Watford at mailman.lug.org.uk
> > > https://mailman.lug.org.uk/mailman/listinfo/watford
> > >
> > >
> > > _______________________________________________
> > > Watford mailing list
> > > Watford at mailman.lug.org.uk
> > > https://mailman.lug.org.uk/mailman/listinfo/watford
> > >
> >
> >
> > --
> > MCSE is to computers as McDonalds Certified Chef is to fine cuisine.
> >
> > _______________________________________________
> > Watford mailing list
> > Watford at mailman.lug.org.uk
> > https://mailman.lug.org.uk/mailman/listinfo/watford
> >
> >
> > _______________________________________________
> > Watford mailing list
> > Watford at mailman.lug.org.uk
> > https://mailman.lug.org.uk/mailman/listinfo/watford
> >
>
>
> --
> MCSE is to computers as McDonalds Certified Chef is to fine cuisine.
>
> _______________________________________________
> Watford mailing list
> Watford at mailman.lug.org.uk
> https://mailman.lug.org.uk/mailman/listinfo/watford
>
>
> _______________________________________________
> Watford mailing list
> Watford at mailman.lug.org.uk
> https://mailman.lug.org.uk/mailman/listinfo/watford
>