[Wolves] Blank screen from boot

[Ron Wellsted]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Re-LoaD wrote:
> Hi All,
> 	ok got a good one for you..
> 
> Boot the box while attached to a crappy 15" Compaq monitor and all is 
> well system comes up and films can be watched.
> 
> If I then unplug the video cable and plug in my TV cable the desktop can 
> be viewed no problem, if I look at the screen resolution the system has 
> detected a Philips 29" (mine is a 32 but its working) 1024x768 @ 60Hz
> 
> When I reboot the system it boots but no video if I swap the cable back 
> to the 15" monitor still no video I have to reboot it to get the video 
> back..
> 
> Can I stop hardware probing at boot time and just go with last good config ?
> 
> I am going to speak to Philips but the TV supports 1024x768 @ 60Hz or 
> 720p or 1080i
> 
> If I connect the system using the DVI lead I get 1080i but the whole 
> picture is shifted to the right about 45%
> 
> 
> I haven't got much hair left to pull out so any help / suggestions would 
> be great.
> 
> Cheers
> 
> Re-LoaD

What distro? video card? drivers?

- --
Ron Wellsted
ron at wellsted.org.uk http://www.wellsted.org.uk
N 52.567623, W 2.136111 Linux Counter No. 202120
Ekiga: 645022
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.6 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org

iQEVAwUBSKhkOktP/KMNOfRbAQLz6gf8Ck13Y8sns7PCCkHnKuFxkMBY9+32TRHW
X/O+OHjVsFmU4mnR5bBCUhInswBRCZ5H1MmewH3aiWeBkTWCKXmBXCdM80yJfCAP
k7FoKs95N2neGdUGpU9G0OCsvot0MuaRBUXaPBGVitvXfHWvcXwBsluO7+pxyiak
++JNUJBHgdAAYeqKvFcmkOdtPphzTZyEvCO/Hc9Iejrld/3tubPM2Ia/1okPAIYB
na8JMUJOXh0oeW8ursP0TBKks5jwtcGkFAVhtdDLDAfXHZieN2KnY5zknxZgRNWl
ZrEkraga7LIznMCtKWh4iRaTZ8kwmFdsLcDufnxpgp2klpJvqgXMTQ==
=78VJ
-----END PGP SIGNATURE-----