[Wylug-help] Networking Trouble

Roger Greenwood rg at nthong.freeserve.co.uk
Tue Jun 1 23:30:12 BST 2004


Hi all,

am having trouble setting up my local network - any pointers appreciated :-

machine 1 - server - 192.168.0.1

machine 2 - slave - 192.168.0.2

std. ethernet through hub (10Meg). Both machines running SuSE 9.1

WAS working at first - set up using yast, broke due to online download (should
have left it alone). WAS able to transfer between machines, now can't even
ping each other. Slave settings untouched, server settings well screwed. Have
now abandoned yast and tried some simple stuff. At one point the server had
both eth0 and eth1 set up but only one (eth1) made the lights flash on the
hub, so that is the one that I left on.

SuSE 9.1 seems to be very different from previous and lots of online help is
not very useful/superceded.

Thanks,

Roger Greenwood.

These are some stuff from the server - any comments appreciated :-

rogerg at server:~> /sbin/ifconfig
eth1      Link encap:Ethernet  HWaddr 00:C0:DF:0A:14:E3
          inet addr:192.168.0.1  Bcast:192.168.0.255  Mask:255.255.255.0
          inet6 addr: fe80::2c0:dfff:fe0a:14e3/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:489 errors:0 dropped:0 overruns:0 frame:0
          TX packets:364 errors:0 dropped:0 overruns:0 carrier:0
          collisions:1 txqueuelen:1000
          RX bytes:37180 (36.3 Kb)  TX bytes:26086 (25.4 Kb)
          Interrupt:5 Base address:0x1000

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:2936 errors:0 dropped:0 overruns:0 frame:0
          TX packets:2936 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:489089 (477.6 Kb)  TX bytes:489089 (477.6 Kb)


server:/usr2 # netstat -r
Kernel IP routing table
Destination     Gateway         Genmask         Flags   MSS Window  irtt Iface
192.168.0.0     *               255.255.255.0   U         0 0          0 eth1
loopback        *               255.0.0.0       U         0 0          0 lo
default         server.local    0.0.0.0         UG        0 0          0 eth1


rogerg at server:~> ping 192.168.0.2
PING 192.168.0.2 (192.168.0.2) 56(84) bytes of data.

--- 192.168.0.2 ping statistics ---
10 packets transmitted, 0 received, 100% packet loss, time 8997ms

rogerg at server:~> ping 192.168.0.1
PING 192.168.0.1 (192.168.0.1) 56(84) bytes of data.
64 bytes from 192.168.0.1: icmp_seq=1 ttl=64 time=0.224 ms
64 bytes from 192.168.0.1: icmp_seq=2 ttl=64 time=0.186 ms
64 bytes from 192.168.0.1: icmp_seq=3 ttl=64 time=0.183 ms
64 bytes from 192.168.0.1: icmp_seq=4 ttl=64 time=0.184 ms

--- 192.168.0.1 ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 2999ms
rtt min/avg/max/mdev = 0.183/0.194/0.224/0.019 ms

rogerg at server:~> ping 192.168.0.3
PING 192.168.0.3 (192.168.0.3) 56(84) bytes of data.


More information about the Wylug-help mailing list