[Blackpool] Fwd: Re: 3D Printed Raspberry Pi Case

[Les Pounder]

---------- Forwarded message ----------
From: "Lara" <lara.lowe at blueyonder.co.uk>
Date: 15 Nov 2016 8:36 a.m.
Subject: Re: [Blackpool] 3D Printed Raspberry Pi Case
To: "Les Pounder" <lespounder at gmail.com>
Cc:

Hi Mike

I will let Josh know and get him to forward to you.

Thanks Lara.

Sent from my iPhone

On 14 Nov 2016, at 22:20, Les Pounder <lespounder at gmail.com> wrote:

---------- Forwarded message ----------
From: "Mike Hull via Blackpool" <blackpool at mailman.lug.org.uk>
Date: 14 Nov 2016 8:28 p.m.
Subject: [Blackpool] 3D Printed Raspberry Pi Case
To: "blackpool at mailman.lug.org.uk" <blackpool at mailman.lug.org.uk>
Cc:

Dave / Josh


The 3D print you were trying to do on the Ultimaker printer unfortunately
failed as it fell over when the printing got towards the top.


It looks to me that it does have a flat face, however I am unable to try
re-orientating the object because all that is on the SD card is the G-code
file. Please email me the .stl file, so I can open it in Cura and
re-orientate the object to try printing again.


Regards


Mike
_______________________________________________
Blackpool mailing list
Blackpool at mailman.lug.org.uk
https://mailman.lug.org.uk/mailman/listinfo/blackpool