[Blackpool] Local laser cutter materials?

[James Page]

Hi Arthur!

Very kind of you to offer – fortunately I’ve been able to source some scrap pieces for the cut-outs, so that’s been handy. Just hoping the cut-out job comes out as I’ve envisaged it!


Best,
James



From: Arthur Garlick <arthur_garlick at hotmail.com>
Date: Tuesday, 3 September 2019 at 16:51
To: Blackpool Makerspace discussion list <blackpool at mailman.lug.org.uk>, James Page <jmsp.1983 at gmail.com>
Subject: Re: Local laser cutter materials?

Hey James if you are at Palatine Library this Saturday I can bring a couple of A4 sheets of 2mm medite.  Other than that hobarts  or kitronik

Regards

Arthur

________________________________
From: Blackpool <blackpool-bounces at mailman.lug.org.uk> on behalf of James Page via Blackpool <blackpool at mailman.lug.org.uk>
Sent: 02 September 2019 13:11
To: Blackpool Makerspace discussion list <blackpool at mailman.lug.org.uk>
Subject: [Blackpool] Local laser cutter materials?

Afternoon all!

I might have a need to use the laser cutter at uni in the next few days but I’m told the material has to be laser-suitable – Medite MDF or laser plywood. Does anybody know if either of those can be bought locally (preferably affordably!)? Online options are either too slow or too expensive when it comes to delivery :/


Best,
James
--
Blackpool mailing list
Blackpool at mailman.lug.org.uk
https://mailman.lug.org.uk/mailman/listinfo/blackpool