[dundee] Highpoint Driver Compile Issue

[Robert Ladyman]

This might help

http://www.pubbs.net/fedora/200910/45541/

> Hi all, I am trying to compile the highpoint rr231x driver for use on the
> openfiler (rPath) platform, but the output I get from the make command is
>  as below;
> 
> [root at master-ds linux]# make
> make[1]: Entering directory
> `/lib/modules/2.6.29.6-0.13.smp.gcc3.4.x86.i686/build'
>   CC [M]
> /opt/src/rr231x_0x-linux-src-v2.5/product/rr2310pm/linux/.build/os_linux.o
>   CC [M]
> /opt/src/rr231x_0x-linux-src-v2.5/product/rr2310pm/linux/.build/osm_linux.o
>   CC [M]
> /opt/src/rr231x_0x-linux-src-v2.5/product/rr2310pm/linux/.build/div64.o
>   CC [M]
> /opt/src/rr231x_0x-linux-src-v2.5/product/rr2310pm/linux/.build/hptinfo.o
>   CC [M]
> /opt/src/rr231x_0x-linux-src-v2.5/product/rr2310pm/linux/.build/config.o
>   LD [M]
> /opt/src/rr231x_0x-linux-src-v2.5/product/rr2310pm/linux/.build/rr2310_00.o
>   Building modules, stage 2.
>   MODPOST 1 modules
> WARNING: could not find
> /opt/src/rr231x_0x-linux-src-v2.5/product/rr2310pm/linux/.build/.him_rr2310
> pm.o.cmd for
> /opt/src/rr231x_0x-linux-src-v2.5/product/rr2310pm/linux/.build/him_rr2310p
> m.o LD [M]
> /opt/src/rr231x_0x-linux-src-v2.5/product/rr2310pm/linux/.build/rr2310_00.k
> o make[1]: Leaving directory
> `/lib/modules/2.6.29.6-0.13.smp.gcc3.4.x86.i686/build'
> 
> 
> Now, I know that specific file does not exist, but I just cannot make it
> work!
> Any ideas?
> 
> Scott
> 
> p.s. drivers from here
> http://www.highpoint-tech.com/USA/bios_rr2314.htm(right at the bottom)
> 

-- 

Robert Ladyman
File-Away Limited, 32 Church Street, Newtyle
Perthshire, PH12 8TZ SCOTLAND
Registered in Scotland, Company Number SC222086
Tel: +44 (0) 1828 898 158
Mobile: +44 (0) 7732 771 649
http://www.file-away.co.uk