[Gllug] X on RH 7.1

[Jim Bailey]

Hi,

Check with the manufacturer or a hardware site but I am 99% certain that 
you cannot have a higher screen resoultion than 800x600 except with 
electronic KVM switches

Peace Jim

On Wednesday, October 31, 2001, at 05:30 PM, Andy Loates wrote:

> I have RH7.1 running on two boxes, connected to a ADI Microscan 17" screen
> through a KVM. One machine has a Matrox Mystique with 4MB, the other uses
> Matrox G400 with 32MB.
>
> The problem I have is that I seem to have a large area of screen that is 
> not
> used when a set the screen res to 1024x768. This happens on both machines
> but is fine when using 800x600.
>
> I seem to recall that this was on the list when RH7.0 came out but cant 
> find
> anything on the archives or on RH site.
>
> Any one have similar problem.
>
> Many thanks
>
> Andy Loates
>
>
>
> --
> Gllug mailing list  -  Gllug at linux.co.uk
> http://list.ftech.net/mailman/listinfo/gllug
>


-- 
Gllug mailing list  -  Gllug at linux.co.uk
http://list.ftech.net/mailman/listinfo/gllug