[Gllug] messing with /dev files

[jim at lateral.net]

> jim at lateral.net wrote:
>> Hi all,
>>
>> despite being offered the loan of a nice external modem by a friend I
>> still feel the need to get this Linmodem working.
>>
>> The problem is with the configuration tools on Debian as far as I can
>> tell sine the modules load into the kernel without too much difficult.
>>
>> The lin modem has its own device /dev/ham but wvdialconf only checks
>> ttyS0 and ttyS1.
>
> I would be surprised if wvdial will only check the two devices.  Here
> is  the sample config file from the man page:

I am using 'wvdialconf' to create the wvdial.config file but I am now going
to try copying the stuff below into a wvdial.config file, edit it by hand
and take it from there.

Thanks will :-)

Peace Jim


> [Dialer Defaults]
> Modem = /dev/ttyS2
> Baud = 57600
> Init = ATZ
> Init2 = AT S11=50
> Phone = 555-4242
> Username = apenwarr
> Password = my-password
>
> It looks like changing the Modem = /dev/ttyS2 to /dev/ham might do you.
>
>  The wvdial on my system is 1.41 although it is unused.
>
> Will.
>
> --
> *claw claw* *fang*
> *shred* *rip* *ad hominem* *slash*
> (more attacks will require consultancy fees.)
>          -Nix.
>
>
> --
> Gllug mailing list  -  Gllug at linux.co.uk
> http://list.ftech.net/mailman/listinfo/gllug




-- 
Gllug mailing list  -  Gllug at linux.co.uk
http://list.ftech.net/mailman/listinfo/gllug