[Gllug] NetGear fa311 errors & errors & errors ....

[Jackson, Harry]

> -----Original Message-----
> From: Thomas Robinson [mailto:tom.robinson at ehbas.com]

It would not be something like irq's all muddled up. I have had this
problem. I believe you are able to share irq's as long as one device does
not use it. If you check /proc/interrupts it will show you your current
interrupt settings. I could be talking out my arse though.

I have got a netgear that I intend to get working on my rh box so thanks for
the pointers to the modules.

Harry


*************************************************************************************
COLT Telecommunications
Registered in England No. 2452736
Registered Office: Bishopsgate Court, 4 Norton Folgate, London E1 6DQ
Tel. 020 7390 3900

This message is subject to and does not create or vary any contractual
relationship between COLT Telecommunications, its subsidiaries or 
affiliates ("COLT") and you. Internet communications are not secure
and therefore COLT does not accept legal responsibility for the
contents of this message.  Any view or opinions expressed are those of
the author. The message is intended for the addressee only and its
contents and any attached files are strictly confidential. If you have
received it in error, please telephone the number above. Thank you.
*************************************************************************************


-- 
Gllug mailing list  -  Gllug at linux.co.uk
http://list.ftech.net/mailman/listinfo/gllug