[Gllug] USB digicam and block-major-11

[Mike Brodbelt]

On Tue, 2002-06-04 at 22:06, Dylan wrote:
> Hi guys
> 
> I'm having some fab progress here with my camera, but I'm stuck on an error:
> 
> kernel: usb-uhci.c: Detected 2 ports
> kernel: usb.c: USB device 2 (vend/prod 0x54x/0x10) is not claimed by any 
> active driver.
> kernel:   Vendor: Sony      Model: DSC - F505        Rev:1.06
> kernel:   Type:   Direct-Access                      ANSI SCSI revision: 02
> kernel: Attached SCSI removable disk sda at scsi0, channel 0, id 0, lun 0
> kernel: SCSI device sda: 126976 512-byte hdwr sectors (65 MB)
> kernel: sda: Write Protect is off
> modprobe: modprobe: Can't locate module block-major-11
> last message repeated 15 times
> kernel: usb-uhci.c: interrupt, status 3, frame# 606
> 
> When I try to mount /dev/sda with:
> 
> mount -tmsdos /dev/sda /mnt/cam
> 
> I get:
> 
> mount: wrong fs type, bad option, bad superblock on /dev/sda, or too many 
> mounted file systems

Are you sure there's no partition table on the MS? Have you tried sda1?
You also want vfat, not msdos as a filessystem type. Have a look at
http://outflux.net/unix/camera/ - it may help.

Mike.


-- 
Gllug mailing list  -  Gllug at linux.co.uk
http://list.ftech.net/mailman/listinfo/gllug