[Gllug] Routing help

[Bush, Jonathan]

Dear all

I am trying to setup some static routes using RedHat 7.3. I have two network
cards in the machine one is 205.248.154.13( which will be my network default
gateway), the other is 172.29.104.2. I have IP forwarding setup in the
machine. My default gateway on the RH 7.3 machine goes to my firewall and
this works fine as I can access the internet. the second goes to the our VPN
to Japan ip address 172.29.104.1, which when I try to ping the address
172.29.104.1 from the client it does not work,  but from the RH 7.3 machine
works fine.

My routing table look like this.
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use
Iface
172.29.104.0    172.29.104.2    255.255.255.0   UG    0      0        0 eth1
172.29.104.0    *               255.255.255.0   U     0      0        0 eth1
205.248.155.0   205.248.154.43  255.255.255.0   UG    0      0        0 eth0
205.248.154.0   *               255.255.255.0   U     0      0        0 eth0
127.0.0.0       *               255.0.0.0       U     0      0        0 lo
default         FIREWALL.daiich 0.0.0.0         UG    0      0        0 eth0

my static route are
eth0 net 205.248.155.0 netmask 255.255.255.0 gw 205.248.154.43
eth1 net 172.29.104.0 netmask 255.255.255.0 gw 172.29.104.2
#eth0 net 209.28.37.0 netmask 255.255.255.0 gw 192.168.0.1

any help will be most welcome

thanks

Jonathan

-- 
Gllug mailing list  -  Gllug at linux.co.uk
http://list.ftech.net/mailman/listinfo/gllug