[Gllug] Dualhead with Radion 7500

Michael Norman michaeltnorman at yahoo.com
Wed Sep 11 17:03:42 UTC 2002


--- Adam Bower <adam.bower at framestore-cfc.com> wrote:
> Philippe Rousselot wrote:
> > on the card, there is a connection for head 1 and
> one for head 2. let's 
> > say one is on the left and two is one the right
> with windows, then with 
> > linux it will be the opposite. sorry if I was not
> clear.
> > 
> > why that? I do not know.
> > 
> > how to do it? bend over, swap the cable and watch
> for the table when you 
> > stand up ;-)
> > 
> > in fact I just saw that matrox provides a piece of
> software that allow 
> > you to position the monitors as you wish, even on
> the top of each other.
> 
> 
> If you are using Xinerama to do this you can look
> here at how to setup 
> your XF86Config-4 so you don't have to risk banging
> your head :)
> 
>
http://www.tldp.org/HOWTO/Xinerama-HOWTO-5.html#ss5.3
> 
> At least I presume it will work, we only have nvidia
> things here and 
> they have there own special options to make it work.
> 
> Adam

Adam

Thanks, I'll look at that later, have to go out now.

Mike
> 
> 
> -- 
> Gllug mailing list  -  Gllug at linux.co.uk
> http://list.ftech.net/mailman/listinfo/gllug

__________________________________________________
Yahoo! - We Remember
9-11: A tribute to the more than 3,000 lives lost
http://dir.remember.yahoo.com/tribute

-- 
Gllug mailing list  -  Gllug at linux.co.uk
http://list.ftech.net/mailman/listinfo/gllug




More information about the GLLUG mailing list