[Gllug] Camera problems. (USB mass storage device)

[Ashley Evans]

On Sunday 31 August 2003 18:54, Peter Adamson wrote:
> Hmm I'm having a little bit of trouble getting a new digital camera to
> work.
>
> It's a Kyocera finecam s5.
>
> It's supposed to be a USB storage device.
> I've already got an MP3 player which acts a a USB mass storage device.,
> that I've already configured,
> so usbdevfs is mounted etc.
>
> I've put the camera into the MP3 players socket, guessing I could just
> mount the camera like I do my MP3 player.
> but I get:
>
> [paga at localhost paga]$ mount /mnt/mp3/
> mount: /dev/sda1 is not a valid block device
> [paga at localhost paga]$
>
>
> looking around:
> /proc/scsi/usb-storage-0/1 shows:
> [paga at localhost usb-storage-0]$ more 1

You could try different partition numbers. Zip drives, iirc, use sdX4.

Ashley
>    Host scsi1: usb-storage
>        Vendor: KYOCERA CORPORATION
>       Product: Finecam S5
> Serial Number: ????????????
>      Protocol: Transparent SCSI
>     Transport: Bulk
>          GUID: 048201030000888888888888
>      Attached: Yes
>
> which is nice, but sg_scan (from sg3-utils)
> isn't showing it.
>
> [root at localhost root]# sg_scan -i
> /dev/sg0: scsi0 channel=0 id=0 lun=0 [em]  type=5
>     IDE-CD    R/RW 4x4x32       1.10 [wide=0 sync=0 cmdq=0 sftre=0 pq=0x0]
> [root at localhost root]# sg_map
> /dev/sg0  /dev/scd0
>
> Any suggestions?
>
> Cheers,
> Peter


-- 
Gllug mailing list  -  Gllug at linux.co.uk
http://list.ftech.net/mailman/listinfo/gllug