[Gllug] Camera problems. (USB mass storage device)

[Peter Adamson]

A litte bit more info for people:
/var/log/messages reports:

Aug 31 20:20:46 localhost kernel: hub.c: USB new device connect on 
bus1/1, assigned device number 3
Aug 31 20:20:47 localhost kernel: usb.c: USB device 3 (vend/prod 
0x482/0x103) is not claimed by any active driver.
Aug 31 20:20:50 localhost /etc/hotplug/usb.agent: Setup usb-storage for 
USB product 482/103/100
Aug 31 20:20:50 localhost kernel: Initializing USB Mass Storage driver...
Aug 31 20:20:50 localhost kernel: usb.c: registered new driver usb-storage
Aug 31 20:20:50 localhost kernel: scsi1 : SCSI emulation for USB Mass 
Storage devices
Aug 31 20:20:50 localhost kernel: USB Mass Storage support registered.

Each time I power off the camera & power it back on again the device 
number increments:
Aug 31 20:33:51 localhost kernel: usb.c: USB disconnect on device 3
Aug 31 20:35:56 localhost kernel: hub.c: USB new device connect on 
bus1/1, assigned device number 4
Aug 31 20:36:29 localhost kernel: usb.c: USB disconnect on device 4
Aug 31 20:36:38 localhost kernel: hub.c: USB new device connect on 
bus1/1, assigned device number 5


So it all looks like its regeristing ok.

My /etc/fstab entry reads
/dev/sde1               /mnt/film               vfat    noauto,user 0 0

and I'm getting:
mount: /dev/sde1 is not a valid block device


Hmmm.

Cheers,
Peter


-- 
Gllug mailing list  -  Gllug at linux.co.uk
http://list.ftech.net/mailman/listinfo/gllug