[Gllug] error kernel compile

Hari Pillai harry.pillei at btconnect.com
Mon Dec 1 20:16:35 UTC 2003


Hi All,
While I run 'make zImage' during kernel compile, getting the error shown
below, 'System is too big. Try using bzImage or modules'.
Any ideas how I could rectify this..
 
 
Thanks in advance..
 
Regards 
Hari
------------------------------------------------------------------------
-----------------------
objcopy -O binary -R .note -R .comment -S compressed/vmlinux
compressed/vmlinux.out
tools/build bootsect setup compressed/vmlinux.out CURRENT > zImage
Root device is (8, 2)
Boot sector 512 bytes.
Setup is 4790 bytes.
System is 1093 kB
System is too big. Try using bzImage or modules.
make[1]: *** [zImage] Error 1
make[1]: Leaving directory `/usr/src/linux-2.4.18-14/arch/i386/boot'
make: *** [zImage] Error 2
[root at falcon linux-2.4]#
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.lug.org.uk/pipermail/gllug/attachments/20031201/a257efca/attachment.html>
-------------- next part --------------
-- 
Gllug mailing list  -  Gllug at linux.co.uk
http://list.ftech.net/mailman/listinfo/gllug


More information about the GLLUG mailing list