[Gllug] processor problem

[Pete Ryland]

On Fri, Oct 17, 2003 at 05:58:24PM +0100, Alain Williams wrote:
> On Wed, Oct 15, 2003 at 09:15:32AM +0100, Chris Bell wrote:
> >    A delayed error like this could be an overheating problem due to a
> > blocked processor heatsink or fan stopped. I have often found a solid wall
> > of debris hidden behind the fan. If it is a sleeve bearing fan it may need a
> > drop of oil. Unscrew the fan from the heatsink, carefully lift the label
> > from the frame side to reveal the bearing, there may also be a rubber bung.
> > Drop a small amount of high quality light oil on to the bearing and replace
> 
> I must admit that I normally squirt some WD40 into the bearing, mainly 'cos
> it is at hand. Any better recommendation ?

AFAIK, WD40 is a *de*greaser.  Good for cleaning stuff, but bad if you want
to reduce wear on moving parts.

Pete

-- 
Gllug mailing list  -  Gllug at linux.co.uk
http://list.ftech.net/mailman/listinfo/gllug