[Gllug] OT:ASUS Laptop For Sale

[Neil Fryer]

Hi All,

I have an ASUS Laptop that I need to sell, and replace with a desktop, 
as at the moment the laptop is my mail and FTP server, and as the 
traffic gets heavier, I know this isn't going to cut it, so I'm selling it.

Specs:

Intel PIII 800
256 MB RAM
20GB HDD (Replaced recently)
CD/DVD Reader
Floppy Disk
Onboard Sound card
S3 8c10 graphics card
2x USB ports
2xPCMCIA Slots
Winmodem
10/100 Realtek 8139 Nic


It's currently running FreeBSD, so here's the dmesg output for anyone 
who's interested:

Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 4.9-RELEASE #0: Mon Oct 27 17:51:09 GMT 2003
    root at freebsd-stable.sentex.ca:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254"  frequency 1193182 Hz
CPU: Intel Pentium III (801.82-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x68a  Stepping = 10
  
Features=0x387f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PA
T,PSE36,PN,MMX,FXSR,SSE>
real memory  = 268369920 (262080K bytes)
avail memory = 255758336 (249764K bytes)
Preloaded elf kernel "kernel" at 0xc053f000.Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 9 entries at 0xc00fdf30
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 
0xf8000000-0xfbffffff at d
evice 0.0 on pci0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <S3 model 8c10 graphics accelerator> at 0.0 irq 9
pci0: <unknown card> (vendor=0x125d, dev=0x1988) at 6.0 irq 10
pci0: <unknown card> (vendor=0x125d, dev=0x1989) at 6.1 irq 10
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xfcd0-0xfcdf at device 7.1 
on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xfce0-0xfcff irq 
9 at dev
ice 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0uhub0: Intel UHCI root hub, class 9/0, rev 
1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
chip0: <Intel 82371AB Power management controller> port 0x2180-0x218f at 
device
7.3 on pci0
rl0: <RealTek 8139 10/100BaseTX> port 0xf000-0xf0ff mem 
0xfedffc00-0xfedffcff ir
q 9 at device 8.0 on pci0
rl0: Ethernet address: 00:e0:18:18:f6:98
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci_cfgintr_linked: linked (60) to hard-routed irq 9
pci_cfgintr: 0:10 INTA routed to irq 9
pcic0: <Ricoh RL5C476 PCI-CardBus Bridge> irq 9 at device 10.0 on pci0
pcic0: PCI Memory allocated: 0x88000000
pccard0: <PC Card 16-bit bus (classic)> on pcic0
pci_cfgintr_unique: hard-routed to irq 9
pci_cfgintr: 0:10 INTB routed to irq 9
pcic1: <Ricoh RL5C476 PCI-CardBus Bridge> irq 9 at device 10.1 on pci0
pcic1: PCI Memory allocated: 0x88001000
pccard1: <PC Card 16-bit bus (classic)> on pcic1
orm0: <Option ROM> at iomem 0xc0000-0xcbfff on isa0
pmtimer0 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppi0: <Parallel I/O> on ppbus0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ad0: 19077MB <HITACHI_DK23EA-20> [38760/16/63] at ata0-master UDMA33
acd0: DVD-ROM <MATSHITADVD-ROM SR-8175> at ata0-slave PIO4
Mounting root from ufs:/dev/ad0s1a
rl0: promiscuous mode enabled

You can have it as is, or if you would prefer I can install MDK 
10/Fedora Core 2/Debian (Woody) on it for you.
I'm looking for £400 for it.

Kind Regards,
Neil Fryer








-- 
Gllug mailing list  -  Gllug at gllug.org.uk
http://lists.gllug.org.uk/mailman/listinfo/gllug