[Gllug] Samba problem

[Richard Huxton]

On Tuesday 10 February 2004 09:27, ben f wrote:
>  --- will <will at hellacool.co.uk> wrote: > Hi all,
> > [root at file2 samba]# testparm
> > Load smb config files from /etc/samba/smb.conf
> > Processing section "[printers]"
> > Processing section "[DEIntranet]"
> > Loaded services file OK.
> > 'winbind separator = +' might cause problems with
> > group membership.
> > Server role: ROLE_DOMAIN_MEMBER
> > Press enter to see a dump of your service
> > definitions
>
> <snip>
>
[snipped winbind advice]
> Try using wbinfo to check you can authenticate
> yourself as you'd expect from the command line.

The other thing might be to not use winbind at all while you're figuring out 
where the problem is - AFAIK you can operate samba 3.0 the same as 2.x if you 
want, you just have to synchronise passwords manually.

-- 
  Richard Huxton
  Archonet Ltd
-- 
Gllug mailing list  -  Gllug at gllug.org.uk
http://lists.gllug.org.uk/mailman/listinfo/gllug