[Gllug] Re: K12LTSP 1.1

[Stuart Sears]

On Sunday 25 July 2004 01:25, Michael Jenson wrote:
> Dear John and others.
>
> I have come to a stop in my project to make two diskless
> workstations connect to K12LTSP.
>
> I start dhcp manualy in /usr/sbin/dhcp, it starts listenenig
> on eth1, but it sais and exits:
> ==
> Listening on socket/eth1/WORKSTATIONS
> Sending on   socket/eth1/WORKSTATIONS
> No subnet declaration for eth0 (192.168 .xx. xx)
> Please write a subnet declaration in your dhcpd.conf file
> for the network segment to which the eth0 is attached
> exiting
> ==
> Workstations say to check medium (the wires) PXE BOOT works fine.
> But, it is rather that DHCP is not working.
> Can someone give some help please.
Sure - what are the contents of your /etc/dhcpd.conf?
dhcpd will refuse to start if it is incorrectly configured.

Stuart
 
--
Stuart Sears RHCE, RHCX
-- 
Gllug mailing list  -  Gllug at gllug.org.uk
http://lists.gllug.org.uk/mailman/listinfo/gllug