[Gllug] Urgent Help re USB please

[Andrew Halliwell]

And verily, didst Sharon Kimble announce to the hordes:
> > Try /dev/usb/ttyUSB1.  Make sure that you have read/write access to
> > that device :o)
> > 
> Thanks Richard. read/write access set up, button on cradle pushed, and
> sync button in KPilot pushed ......... and it fails! So I've looked in
> the Systems Log and this is what it showed;-
> -------------------------------
> Mar  5 16:23:24 localhost kernel: usb.c: USB disconnect on device
> 00:11.2-2 address 10 iso-8859-1
> Mar  5 16:23:24 localhost kernel:usbserial.c: Handspring Visor / Treo /
> Palm 4.0 / Clié 4.x converter now disconnected from ttyUSB0

There...
ttyUSB0, not USB1 might be your problem.
Do what you did to USB1 to USB0 to make sure it's read/writable, then...
point kpilot at ttyUSB0 and try again.
-- 
Gllug mailing list  -  Gllug at gllug.org.uk
http://lists.gllug.org.uk/mailman/listinfo/gllug