[Gllug] Urgent Help re USB please

[Sharon Kimble]

On Fri, 5 Mar 2004 17:06:25 +0000 (GMT)
Andrew Halliwell <ah at gnd.com> wrote:

> And verily, didst Sharon Kimble announce to the hordes:
> > > Try /dev/usb/ttyUSB1.  Make sure that you have read/write access
> > > to that device :o)
> > > 
> > Thanks Richard. read/write access set up, button on cradle pushed,
> > and sync button in KPilot pushed ......... and it fails! So I've
> > looked in the Systems Log and this is what it showed;-
> > -------------------------------
> > Mar  5 16:23:24 localhost kernel: usb.c: USB disconnect on device
> > 00:11.2-2 address 10 iso-8859-1
> > Mar  5 16:23:24 localhost kernel:usbserial.c: Handspring Visor /
> > Treo / Palm 4.0 / Clié 4.x converter now disconnected from ttyUSB0
> 
> There...
> ttyUSB0, not USB1 might be your problem.
> Do what you did to USB1 to USB0 to make sure it's read/writable,
> then... point kpilot at ttyUSB0 and try again.

Thanks, done it, tried it and it failed again.

The one consistent thing is 'device 00:11.2-2 address 13' with the
address increasing by one each time.

Would installing another usb card help? Or would it just confuse things
even further?

Sharon.
-- 
Gllug mailing list  -  Gllug at gllug.org.uk
http://lists.gllug.org.uk/mailman/listinfo/gllug