[Gllug] scsi host adaptor

[Alain Williams]

On Wed, Jan 31, 2007 at 04:25:12PM +0000, Chris Jones wrote:
> Hi
> 
> Alain Williams wrote:
> > The 2930 has an 'ultra scsi' interface (50 pin), the tape drive 'ultra wide lvd' (68 pin).
> 
> There are some similar versions to the 2930. I have a 2940U2W which has
> an internal 68pin LVD connector, an external 68pin LVD connector (both
> on the same bus), an internal 68pin ultra scsi inteface and an internal
> 50pin ultra scsi interface (both on the same bus).

I ended up finding a *very* helpful file in the kernel Documentation/scsi/ directory
that listed all the adaptec model numbers & what module is needed.

I ended up choosing an Adaptec 19160 PCI 32bit U160 SCSI.
If I win the bid I'll see if it works.

Thanks all.

-- 
Alain Williams
Linux Consultant - Mail systems, Web sites, Networking, Programmer, IT Lecturer.
+44 (0) 787 668 0256  http://www.phcomp.co.uk/
Parliament Hill Computers Ltd. Registration Information: http://www.phcomp.co.uk/contact.php
#include <std_disclaimer.h>
-------------- next part --------------
-- 
Gllug mailing list  -  Gllug at gllug.org.uk
http://lists.gllug.org.uk/mailman/listinfo/gllug